Dual 232 and USB 4 wire resistive touch Controller
Dual 232 and USB 4 wire resistive touch Controller
Dual 232 and USB 4 wire resistive touch Controller

1 / 1

Dual 232 and USB 4 wire resistive touch Controller

Get Latest Price
Send Inquiry
Model No. : 4 Wire Resistive Touch Combo 232 and USB Controller 4020D
Brand Name : LeadingTouch

Product description

Specifications 1, can use elo driver

2, support all size 4 wire resistive touch panel

LeadingTouch 4020D 4 Wire Resistive Touch Combo 232 and USB Controller Card, the newest controller supplied by Leadingtouch, is designed for 4 Wire resistive , can support full serials of 4 Wire resistive touch product and fully compatible with ELO 2216C(Dual) controller. 4020D providing Comb interface for both RS232 and USB with many superior advantages such as stable performance and fast reaction.  

Model

4020D

Construction

Four-layer surface-mount design with internal ground plane for EMI suppression.

Dimensions

Total width: 1.38 inches (35 mm), including connectors

Total length: 2.36 inches (60 mm)

Total height: 0.47 inches (11.8 mm)

Supply Voltage

+5 VDC, nominal (+4.75 to +5.25V DC), and Current 50mA typical, 240mA maximum at +5 VDC.

Typical power dissipation is 500mW at 5V. Minimum power-supply 400 mA

Serial Interface

EIA 232E (Serial RS-232), DCE configuration. 9600 Baud Rate, 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex

USB Interface

Interrupt-type, full-speed USB device.

Operating Modes

Leadingtouch protocol

Customer specific protocol

Initial/ Stream/ Untouch Modes

Touch Resolution

4096x4096, size independent

Conversion Time

Approximately 10 ms per coordinate set

Reliability

MTBF greater than 1,543,000 hours per MIL-HDBK-217-F2

Temperature

Operating: 0°C to 65°C; Storage: -25°C to 85°C

Humidity

Operating: 10% to 90% RH, noncondensing; Storage: 10% to 90% RH, noncondensing

Operating Altitude

10,000 feet

Shock and Vibration

With Leadingtouch standard container, meet International Safe Transit Association project 2A test procedure.

ESD:

Per EN 6100-4-2 1995. Level 4, Contact Discharge - 8kV ; Air Discharge - 15kV positive and negative polarity

Flammability

94V0

LED Indicators

The 4020D controller has one LED status indicators. When 4020D controller initially connects to host, the LED will be constantly on. When touchscreen connects to 4020D, the LED will snuff out after 3 seconds and be constantly on during touch.

Agency Approvals

The touch system including 4020D controller, touchscreen and connection cable has certified with FCC Part 15. The touch system including 4020D controller, touchscreen and connection cable is compatible with EN55022 and EN55024 standards and is certified with CE

Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628