1 / 3
Model No. : | DT300 camera with temperature sensor |
---|---|
Brand Name : | NAVIPRO |
Product description
Measurement Range | Temperature: -55~+125℃, Humidity: 0%~100% |
Accuracy | ±0.5℃, ±3%RH |
Power Supply | 10-32V DC |
Output Signal | Field Bus: RS485, CAN Bus |
Wireless: Zigbee, Wifi, GPRS | |
Protocol | Modbus RTU/ Dingtek |
Working Temperature | -40 ~ 85℃ |
Protection Rank | IP65 |
LED Display | Optional |
Recharge Battery | Optional |
Wireless | Optional |
Baud rate | 9600 |
Data bit | 8 |
Stop bit | 1 |
Check sum | none |
Section | Header | Command | ID | Content | Checksum | Tail |
Bytes | 1 | 2 | 2 | 0/6 | 2 | 2 |
Content | $ (0x24) |
|
|
|
|
|
Remark |
| in caption | in ascii, 01~FF, in caption | for reading, it is 0. For writing, it is 6 bytes. | calculate sum from header to content, get low 8 bit, then change to 2 ascii | 0x0D 0A |
Section | Header | Command | ID | Content | Checksum | Tail |
Bytes | 1 | 2 | 2 | 6 | 2 | 2 |
Content | * (0x2A) |
|
|
|
|
|
Remark |
| in caption, see above command list | in ascii, 01~FF, in caption | replied value for reading in mm or L. OKOKOK for successful setting. NONONO for failed setting | calculate sum from header to content, get low 8 bit, then change to 2 ascii | 0x0D 0A |
Command list | |
RT | Read Temperature |
RH | Read Humidity |
SI | Set ID |
Send your inquiry to this supplier