Downhole Drilling Surveying Inclinometer

  Product Description Downhole Drilling Surveying Inclinometer 1. Product Introduction   Our multi-shot electronic inclinometers can not only measure the data of inclination, magnetic azimuth, tool face etc of a certain section of the well trajectory, but also can be used for measuring these data of a specific measuring point at the well bottom, which means this product simultaneously has a Multi-shot measurement function as well as a single point measurement function.   Apply for the measurement of the well trajectory during drilling in oil, geologic, coal and water conservancy industries etc.    2. Main Techinical parameters  

Item	Measurement Range	Precision
Well Inclination	0~180°	±0.1°
Magnetic Azimuth	0~360°	±1°(Inclination≥5°)
High-side tool face	0~360°	±1°(Inclination≥5°)
Magnetic tool face	0~360°	±1°(Inclination≤5°)
Time-delay range	2~299min
Time-interval range	6~3600s
Collecting points	3600 points
Max. working temperature of the probe	125℃

 
 3. Otehr Tecnical Parameters  

O.D. of the Instrument (mm)	Max. working Temperature (℃)	Max. Working Pressure (MPa)
35	125	120
45		120
45	260	120

   4. Highlights   Particular Power-off protection:It will not affect the instrument’s normal work even if there is a sudden outage caused by special strong vibration or impact.   Low power consumption design, long working hours:With the low power consumption design, a fully charged battery can guarantee a continuous working for more than 80 hours.   Good resistance to impact and vibration:The instrument is radially and axially equipped with multistage buffering devices, such as rubber, springs, hydraulic anti-seismic shock absorber, which effectively improves the impact resistance as well as the vibration resistance of the instrument.   Available for high temperature measurement and deep well measurement:Assembled with the thermal insulation component, the instrument is available for high temperature and deep well measurement.     5. Certifiates  
    6. Cooperations               Company Information   Beijing Hekang Science & Technology Development Co., Ltd. was founded in 1996. Our company is located in Shijingshan District, Beijing, with a total office area of over 2700 square meters. We are specialized in the R&D, production, sale and technical service of surveying instruments. Our main products are oil drilling inclinometers and coal mine underground measuring system, with an annual production capacity of more than 500 sets of over 20 different types of inclinometers.        "Cooperation, Creation, Development, Improvement" is the business philosophy of Hekang. Focus on customer demand and continue to provide our customers with high-quality products and services is our responsibility.       All staff of Hekang sincerely hope to cooperate with all friends in the world. Let’s create a beautiful tomorrow together!