Digital SINGLE SHOT Drilling Inclinometer

Product Description   Digital SINGLE SHOT Drilling Inclinometer   1. Product Introduction of drilling inclinometer   The product is used in the drilling process to measure the inclination, magnetic azimuth, tool face and instrument temperature and other parameters at downhole(measurement point) during drilling process.     2. Product Features of drilling inclinometer
  No need timing, simple operating steps:Technicians no longer need to worry about how long the timing should be.   Avoid hurried operation:No hurried preparation work before the instrument down into the well.   No need to wait, start survey while arriving at the bottom: The instrument will start survey once it arrives at the well bottom.   Reliable and with high stability:It will avoid measurement failure caused by short timing.   Avoid washout, prolong life: There is no need to wait, so it reduces the mud flushing time to the carrier after it arrives at the well bottom.   Time-saving, Cost-reducing:This instrument can remarkably reduce the survey time, which lowers a lot of drilling cost for the drilling crews.   Several ways to control the operation:The operation can be controlled by a controller or a computer.   Accurate response, screw measurement:When the instrument arrives at the measurement point, mark the transitory quiescent time from the rest of the drilling tools to the float-up time of the instrument after the pump stops, thus it will realize the accurate measurement under screw drilling condition.   Allow various measuring methods, wide adaptability:Equipped with different outer protecting assembly, the instrument allows to work in different operating environments.   Available for high temperature measurement and deep well measurement:Assembled with the thermal insulation component, the highest working temperature will reach up to 260℃ and the highest working pressure will be 105Mpa.           3. Self-floating Singleshot Electronic Inclinometer Product List          

Product Series	Product Size	Working Environment
		Maximum Working Pressure(MPa)	Maximum Working Temperature(℃)	Minimum Inner Diameter of Drill Tool(mm)	Suitable Mud Density(g/cm³)	Funnel Viscosity(s)
Φ38 Self-floating Fixed-point Electronic Inclinometer(70MPa)	Φ38x6606	70	125	45	≥1.0	<70
Φ40 Self-floating Fixed-point Electronic Inclinometer(45MPa)	Φ40x5718	45	125	52	≥1.0	<70
Φ48 Self-floating Fixed-point Electronic Inclinometer(75MPa)	Φ48x6099	75	125	60	≥1.0	<70
Φ48 Self-floating Fixed-point Electronic Inclinometer(95MPa)	Φ48x6099	95	125	60	≥1.2	<70
Φ48 Self-floating Fixed-point Electronic Inclinometer(105MPa)	Φ48x6099	105	125	60	≥1.3	<70
Φ48 High Temperature Self-floating Fixed-point Electronic Inclinometer(75MPa)	Φ48x6099	75	260	60	≥1.0	<70
Φ48 High Temperature Self-floating Fixed-point Electronic Inclinometer(95MPa)	Φ48x6099	95	260	60	≥1.2	<70
Φ48 High Temperature Self-floating Fixed-point Electronic Inclinometer(105MPa)	Φ48x6099	105	260	60	≥1.3	<70

          Packaging & Shipping       Our Services   After-sale service commitment   “Customer first”is the principle of Hekang. We are committed to provide users with excellent product and superior service.   We guarantee a 100% of pass rate when deliver the products.   The warranty period for product quality assurance is 1 year. Within 1 year after using the instrument, if the instrument (or component) fails working normally (non-operational reasons), our company promises to repair, free of charge. When we repair the product, we will try to save the value of customers' products.   Hekang will make a reaction within 24 hours after receiving notice of customer service requirements and take appropriate measures according to the actual situation, sending service personnel to provide on-site service if necessary.       Company Information     *Your trust is our power*     u  In 1996, Hekang was Qualified as Zhongguancun Science Park New High-tech Enterprise; u  In 1996, Hekang obtained  <Certificate of Inspection>; u  In 1996, Hekang obtained the License for Manufacturing Measuring Instruments of the People's Republic of China ; u  In 1998, Hekang passed the ISO9001 Quality Management System Certification; u  In 1999, Hekang become the first enterprise to win the government bounty for strictly sticking to ISO Quality Management in Beijing; u  Hekang was qualified as an A grade Credit enterprise forfive-year continuously since 1999; u  In 2003, Hekang was quality as a fast-growing high-tech enterprise in Zhongguancun Science Park; u  In 2008, Hekang obtained the New High-tech Enterprise Certificate in Beijing; u  In 2009,“YHD1-1000T MWD Probe” won the first prize of China Coal Industry Science and Technology Award; u  In 2012,“YHD1-1000T MWD Probe”won the Second Prize of "National Scientific and Technological Progress Award" issued by the State Council; u  HKCX Series of inclinometer was has been designated as the specific instrument for four times consecutively in the National Enterprises Employees’ Skills Contest among all the national petroleum enterprises in 2002,2006, 2010 and 2013; u  Over the years, Hekang has sold over 6000 sets of inclinometers.     All staff from Hekang sincerely welcome friends from the world to visit our factory and test our products!