Dielectric Powder Coating

Dielectric Powder Coating are very close to their epoxy counterparts. Epoxy-polyester hybrid coatings are generally tough, flexible, and competitively priced when compared to pure epoxy coatings. Hybrids provide some improvement in weather ability, but they will begin to chalk almost as fast as an epoxy coating.

GENERAL TYPES;Epoxy Polyester /Hybrid powder coating;Epoxy Powder Coating;Polyester TGIC -Free powder coating;Polyester TGIC Powder coating;Polyurethane powder coating

FUNCTIONAL TYPES;Anti-gassing Powder Coating for cast steel;Clear Topcoat Powder Coating;Heat Transfer Powder Coating;High Temperature Resistant Powder Coating;Metallic/Peal Powder Coating;Zinc Rich Epoxy Primer Powder Coating

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

• Specific gravity : 1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity: 24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE 

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY  for dielectric powder coating

Powder coating is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating

Established in 1998, Yangzhou Aolian Powder Coating Co., Ltd has our own subsidiary factory - Founded with a total investment of USD8,000,000, we have a 30,000 square meters' factory equipped with 10 automatic powder coating production lines.

Each year we produce 10,000 metric tons of powder coatings. Our product range covers thermosetting powder coatings, pure epoxy powder coatings, epoxy-polyester powder coatings, pure polyester powder coatings, acrylic powder coatings and polyurethane powder coatings. The different series of powder coatings we output are suitable for painting a wide range of products including electric appliances, furniture, garden tools, vehicle parts, pipes, highway guardrails and much more. At present, we export 35% of our thermosetting powder coating abroad.

At Aolian Powder, we place much emphasis on the quality control and the continued research and development of new products. We use an advanced computer management system, imported testing instruments and production techniques from all over the world. As a member of Chinese Powder Coating & Finishing Union, we have passed ISO9001 certification.