Specifications plasma gas metal table cuttting machine
1. easy operation and maintainance
2. oem and factory
3 high precision
dezhou nakeen table cnc plasma aluminum cutting machine for 45 degree factory made with low price product advantage 1.Bilateral drive,stable operation 2.High precision, good effect 3. Arc voltage height (THC) 4.Can be installed a water spraying device, reduce the thermal deformation 5.Can cut carbon steel, stainless steel, copper, aluminum and other non-ferrous metals 6. Simple operation & maintenance and so on. Features and advantages 1. Compare with the plasma cutting, it has the high precision cutting for different kinds of metal materials, like cutting stainless steel, carbon steel, alloy steel, spring steel, aluminum, copper, silver, titanium and other metal materials below 6 mm. 2. Compare with the NC, which can cut any complicated process and shape.No noise and no need to open any moulds at all. 3. Compare with linear cutting, which has much faster speed,100 times higher than it. 4. Double lead screw to drive, Small heat affected zone, good dimension stability. Flat and handsome laser-slotted, without later process 5. High performance/price ratio: the price is only 1/8 of the similar CO2 laser cutting machine and 2/5 of the equivalent NC Punch 6. Low use cost: only USD2 per hour which is 1/8-1/10 of the similar CO2 laser cutting machine (USD22-USD35 per hour) 7. Low follow-up maintenance cost: only 1/10-1/15 of the similar CO2 laser cutting machine and 1/3-1/4 the equivalent NC Punch 8. Steady performance: as a mature laser apparatus, the YAG laser cutting machine is suitable for most metal manufacturing and processing industry. Technical parameters
1 | Cutting shape | any shapes |
2 | LCD Display Dimension | 7.0Inches |
3 | Effective Cutting Width (X axis) | 1300mm |
4 | Effective Cutting Length (Y axis) | 2500mm |
5 | Cross Beam Length | 1800mm |
6 | Longitudinal Rail Length | 3000mm |
7 | Cutting Speed | 0-8000mm per minute |
8 | Plasma Cutting Thickness | 2--20mm ( Depends on plasma power source capacity) |
9 | lifting body | 1set |
10 | Drive Mode | bilateral drive |
11 | Cutting Mode | plasma |
12 | Ignition device | Auto ignition device |
13 | Height regulating device | Arc voltage height |
14 | File transmission | USB transmission |
15 | Nesting software | Fastcam standard |
16 | File transmission | USB |
17 | LCD Display Dimension | 7" colour |
18 | Plasma Power Source | Hypertherm PowerMAX65/85/1650 or other |
19 | Plasma Air | Only pressed Air |
20 | Plasma Air Pressure | Max. 0.8Mpa |
21 | Cutting precision | ±0.5mm National standard JB/T10045.3-99 |
22 | Control accuracy | ±0.01mm |
23 | Power Supply Voltage/Frequency | 220V 50HZ |
24 | Rated Power Supply | 1000W |
25 | Working Temperature | -10°C-60°C. Relative Humidity, 0-95%. |
Control system and software introduction This control system is composed by the industrial PC, center control card, controller display of power supply, professional control software. The PC is installed into the control box, the center control card receive the orders from the software and execute it. Through the controller display of power supply, we light the Xe lamps, adjust the cutting parameters like current, frequency, pluse width accroding to different materials and plate thickness. And through the control software, we imput the cutting file, add the lead line, give kerf compensation, fix cutting position and so on. CERTIFICATION
PACKING PICTURE
YOUR QUESTION 1. Are you factory or foreign trade company? We are industry and trade integration. 2. What shall we do if don't know how to operate your machine after bought from you? We have detailed installation and operating instructions attached, also comes with video, it is very simple. We have telephone and email support at 24 hours a day. 3. What's the quality of your products? Parts of our products come with best quality, the machine after the installation completed, will be after 48 hours of aging. Also our products passed CE certification, exported to lots countries around the world, such as Russia, Iraq, Belgium, Kazakhstan, Korea, etc. You can rest assured with the quality absolutely. 4. What to do if the machine has a problem? 24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost. 5. What other things also need after we bought your machines? (1) With flame cutting: you just need to access to oxygen and fuel gas. (2) With plasma cutting: need plasma power source and air compressor. You can match plasma power supply by yourself, or buy together with the cutter from us, it's optional. If you buy from us, we will connect the wires of plasma power source and CNC cutting machine together, then more conveniently to use. 6. What are your payment terms? We support T/T, L/C, Western Union and so on. Other ways can also be received after we both sides discussion and agreement. What are you waitiing for? contact