Dac360 Control System We67k-250/3200 CNC Bengding Machine with CE, ISO, SGS
Dac360 Control System We67k-250/3200 CNC Bengding Machine with CE, ISO, SGS
Dac360 Control System We67k-250/3200 CNC Bengding Machine with CE, ISO, SGS

1 / 1

Dac360 Control System We67k-250/3200 CNC Bengding Machine with CE, ISO, SGS

Get Latest Price
Send Inquiry
Model No. : DAC360 control system WE67K-250/3200
Brand Name :

Product description

1. THE STRUCTURE OF THE MACHINE
Welded steel plate, the frame consists of right and left wall boards, working table, oil box, groove steel etc. The stress of the parts has been eliminated by vibration. The machine enjoys high accuracy and high strength and good rigidity.

2. HYDRAULIC SYSTEM
It is a complete electrolyte servo synchro CNC controlled press brake.
It adopts the most world advanced electrolyte servo system which is produced by HOERBIGER company from Germany. The hydralic force is very reasonabley designed and also easy for installation.It minimizes the quantities of oil passages and connectings in which way the reliability and safety can be guaranteed.

3. MECHANICAL SYSTEM
1). It adopts the electrolyte synchro control system whose acuracy is very high. There are two grating rulers installed at the two ends of the slide, this can make the slide movement be parallel to the working table.
2). It adopts the working table compensation structure in which way the accuracy can be improved.
3). The positioning accuracy of the CNC servo motor of the back gauge is very high.

4. CNC SYSTEM

The DNC600S computer is originally imported from Switzerland CYBELEC Co. which is specially used for press brakes.
The electrolyte servo press brake can be controlled by cnc system automatically.This technology is a combination of both the operation system and press brake procedures.The system can work steadily and reliablely.
The CNC system can calculate the working time and quantities of press brake actions automatically. In this way it saves the labour and time to calculate the material consumption.This can improve the efficiency.
When in single step operation, the user just needs to input the relevant data into the system, the system then can check out the pressure needed for press brake and get every thing in order.
If user wants to make several steps press brake actions on the parts, then the user just needs to input the intended dimensions into the system.The system can make continuous press brake actions as per your needs.
This CNC system can store 11 press brake procedures, and you can make multiple steps per procedure.When you process different parts, you just need to find out the programmed procedures inside the computer and then the computer can work well on every steps as per the programing.
The CNC system can give alarm signals on incorrect operations and this can avoid the mistakes in operation.
The CNC system can control below datas automatically: pressure discharge time, pressure keeping time, press brake pressure, press brake angle, the opening height of slide and etc.

5. SYNCHRO CONTROL SYSTEM
This machine adopts the electrolyte servo system whose accuracy is very high.Two light rulers (Y1-Y2) have been installed at the two sides of the machine to measure the exact distances between the slide two ends and the working table. The rulers are connected with the working table. In this way, the wallboard deformation will not affect the slide positioning accuracy.The position data will be delivered to the CNC system and then it can check out the servo valve control signal (S2-S2).

6. THE DEVIATION RESISTANCE ABILITY OF THE MACHINE
The elctrolyte servo system of this machine is an inner closing ring control system.It can check out the synchro discrepancies of the slide by the movement of the light ruler.And the elctrolyte servo valve can correct the slide discrepancies. This can make the slide always be parallel to the working table.

7. THE ACCURACY OF THE MACHINE
X-axle, the repeated positioning accuracy is: +-0.1mm;
Y-axle, the repeated positioning accuracy is: +-0.01mm.

8. TECHNICAL SPECIFICATION
1 Type CNC hydraulic press brake
2 Nominal power (KN) 2500KN
3 Length of working table 3200mm
4 Internal space of upright posts 2700mm
5 Depth of throat 400mm
6 Slider stroke 200mm
7 Max opening height 480mm
8 Main motor 15KW
9 CNC control system CYBELEC 600S,3+1Axes(Y1,Y2,X,V)
10 Main electric elements in cabinet Schneider
11 Switch of electronic box ABB
12 Main hydraulic components Hoerbiger
13 Seal in the cylinders NOK
14 Servo system YASKAWA
15 Grating scale GIVI
16 Others 1). Work table cylinder compensation (V axis);
2). Nickel plating phosphorus alloy on surface of piston;
3). Cold extrusion process of cylinder;
17 Gross Weight 15T
18 Before packing size(mm) 3900×2150×2950
19 Transportation One 20OT
Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628