CXYD-100 Oil Viscosity Meter

Specifications Oil Viscosity Meter is for viscosity of decalin solution of polyethylene and polypropylene,and bitumen dynamic viscosity

1. Usage Model CXYD-100 Oil Viscosity Meter is designed according to the request of People’s Republic of China standard GB/1841 “Polyolefin Resin Solution Viscosity Test Method”. It is applicable for determining the viscosity of decalin solution of polyethylene and polypropylene under the set temperature according to GB/1841. This instrument is also applicable for determining the bitumen specimen dynamic viscosity under set temperature according to People’s Republic of China industrial standard T0620 “Bitumen Dynamic Viscosity Test (Vacuum Pressure Reduction Capillary Method)” (idt: ASTM D2171, JIS and AASHTO T202).   2. Main structure Model CXYD-100 Oil Viscosity Meter is composed by capillary viscometer, mercury thermometer, motorized mixing device, electrical heating device, temperature controller, glass constant temperature water bath, light, and so on.   3. Characteristics     3.1  Galss constant temperature water bath: it adopts φ300×300mm hard glass pot. There are three 3 holes on the  cover for the capillary viscometer clip and bakelite cover.     3.2  It adopts the 200V, 38W2D fluorescent lamp for observating the reading on the viscometer.     3.3  Temperature controller:           3.3.1  Temperature sensor: Industry platinum resistor, the division number is Pt100.           3.3.2  Temperature controllor: intelligent, has the function of PID self-adjusting and four figures LED window indication. Temperature control quickly, quick respond, accuracy ±0.1℃.           3.3.3  Heating system: 600W disc type electrical heating pipe for heating. It can adjust the output by the control silicon automatically to ensure the stability of the bath temperature.    3.4  Mixing system: motorized mixer is single phase asynchronous motor, mixing even, the temperature controlling reaches to the request of the technical index.    3.5  Vacuum pressure reduction system: advanced DC micro vacuum pump, small volume (35*51*68), low power consumption (40W), have flow (5L/min), low noise, long life; pressure digital display, automatic constant pressure, adopting mini-pressure transmitter, high accuracy programmable meter, stable working.   4.  Working condition   4.1  The instrument should be placed in the environment which is dry, clean and without corrosive gas, should be placed on the test platform which is flat and stable.   4.2  Choose the right capillary viscometer according to test request.   5.  Main technical parameters   5.1  Working voltage: AC220V±10%, 50Hz   5.2  Constant water bath heating power: 600W   5.3  Constant water bath working temperature: 60℃   5.4  Constant water bath temperature control accuracy: ±0.1℃   5.5  Mercury thermometer: bar type, division value 0.1℃                                               Temnperature measuring range: 50-100℃   5.6  Constant water bath capacity: no higher than 20L   5.7  Specimen quantity: capillary quantity one time: 3pcs   5.8  Mixing motor: power 6W; rotatioin speed 1400r/min   5.9  Ambient temperature: -10℃~+35℃   5.10  Relative humidity: <85%
  5.11 Temperature sensor: industry platinum resistor, the division number is Pt100   5.12 Vacuum pressure reduction system: pressure digital display, automatic constant pressure, DC micro-vacuum pump (40W, 5L/min)   5.13 Power consumption: no higher than 700W   5.14 Vacuum pressure reduction capillary viscometer: one group including: 25, 50, 100, 200, 400, 400R, 800R