Custom Metal Uncoiling And Recoiling Slitting Machine For Coil Car, Uncoiler And Shearer

Custom Metal Uncoiling and Recoiling Slitting Machine for Coil Car, Uncoiler and Shearer

 

Details Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, shearer, correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler and coil car, hydraulic system, ect. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading. This line can be adjusted to do recoiling or dividing work to meet customers demands. PLC system is used to select the information from every part of the line, centrally controlled. There also has speed self adjusted and keep memory after lost power supply function. So the line has efficient performance. Model YD-0245 Coil thickness 0.2mm-6mm-22mm. Slitting speed Max.120m/min. Loading capacity of the uncilier Max6-35T Coil I.D 460-560mm Material of slitting blade 9CrSi Precision +/-0.05mm Main shaft Diameter 240-400mm. Suitable material Hot/cold-rolled/carbon steel/stainless.

 

Cut to length:

 

 

Model	YD-0245
Material width	800-1800mm
Speed	18-30m/min
Coil loading	Max10-30T
Range of shearing length	10.0-999.9mm
Precision of shearing	+/-0.3mm
Precision of leveling	+/-1-2mm/sqm.
Coil car	Option
Suitable material	Hot/cold-rolled/carbon steel/stainless.

 

Slitting line can do un coiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, shearer, correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler and coil car, hydraulic system ect. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.

This line can be adjusted to de recoiling or dividing work to mjeet customers demands. PLC sysytem is used to select the information from every part of the line, centrally controlled. There also has speed self adjusted and keep memory after lost power supply fuction. So the line has sufficient performance.

1:1Form of coil car: four-wheeled walk

1.2Structure of coil car: steel structure and it is V-shape on top.

1.3Power of continuous walk:2.2kw cycloidal gear decelerator

1.4Power of lifting and lowering:hydraulic cyliner driven 180mmx700mm

1.5max journey of lifting and lowering:700mm

1.6Max loading capacity:10000KG

1.7coil car with pit

 

3-2)Single mandrel decoiler machine

2.1Way of decoiling: single arm mandrel ,hydraulic inner expansion

2.2Form of expansion and contracting drum :jaw 3 steps ,hydraulic oil cylinder driven

2.3power of movement: hydraulic oil cylinder driven(oil cylinder specification 125mmx900mm)

2.5coil max outer dia:1800mm

2.6coil width:300mm--2000mm

2.7Max loading capacity:10000kg

2.8 way of brake:pneumatic brake

 

3-3)Guiding head and shovel head

3.1Form of head guiding structure: steel welded structure ,oil cylinder for lifting&lowering

3.2hydraulic oil cylinder specification: 80x500mm ,2pcs

3.3Pulling rolls:40Cr,250mmx400mm ,rubber rolls

3.4pulling power:2.2kw cycloidal gear decelerator

3.5specification for shovel head:steel sheet weled structure

3.6 Power of lifting and lowering:hydraulic cyliner:80mmx400mm:

3.7power of expanding&contracting: hydraulic cyliner:63mmx400mm

 

4) 2 Rolls feeding

4.1 feeding rolls specification: 160mmx1700mm

4.2 material of rolls: rolls 40Cr,hardened chromed

4.3 oil cyliner for leveling rolls lifting& lowering: 80mmx100mm,2pcs

4.4 lifting&lowering organ:2.2kw cycloidal gear decelerator

4.5 power of feeding:5.5kw motor plus speed reducer with joint coupling

 

5)Hydraulic sheet head-shearing machine 1set

5.1 Specification:0.25-3.0mmx2000mm

5.2 Shearing max thickness:3mm

5.3 Max width:2000mm

 

6)Deviation rectifying unit(side guiding unit)

6.1Vertical rolls specification: 90mmx125mm 3 pairs

6.2Coil pressing rolls: 100mmx1700mm,chromed

6.3 Power of coil pressing rolls:hydraulic oil cyliner ,80mmx100mm

6.4Range of rectifying deviation:300-2100mm

6.5 way of side guiding:single side by hands control

7)Main slitting machine

7.1. Way of slitting: stands round blade slitting

7.2 Specification of slitting shaft: 200mmx2100mm

7.3 Material of blades shafts :40Cr hardened chrome and polishing

7.4 Round disc blade specification:D320xd200mmxT10mm

7.5 Material of blades:6Crw2Si, hardened chrome HRC60—62degrees

7.6 Slitting motor power:DC90KW motor with joint coupling plus speed reducer

7.8 Power of slitting pressing drive:2.2KW cycloidal gear decelerator

7.9Slitting speed:0—60m/min adjustable

7.10 Slitting width accuracy:+/-0.03mm

7.12Way of changing blade: hydraulic oil cylinder drives the stands to move,

7.13 Hydraulic oil cyliner specification:63mmx450mm

8 )Side scrap recoiler

8.1 Double sides waste recoiler

8.2 Specification of recoiling plate: 450mmx350mm

8.3 Power of recoiling:4kw motor inverter control

 

9) Pit /loop table

9.1 Form of pit: concrete poured,double sides flat table

9.2 Loop size:4.5mx2mx3.5m(LXWXH)

9.3 Flat table structure: square pipe welded with sliding rolls on the ends and plastic board on covered on the face

9.4 Hydraulic oil cyliner lifting and lowering

 

10)Damping& pre-seperator(tension rolls)

10.1Pre-seperator shaft dia: 95mmx2100mm

10.3 Pre-seperator discs specification200mmx3mm,65Mn quenched processment

10.4 Pre-seperator shaft lifting&lowering:hydraulic oil cyliner drive 75mmx100mm

10.5 Power of pressing:hydraulic oil cyliner 80mmx1500m,2pcs

10.6 Material of rolls:40Cr heat processment HRC55-56

11)Coil recoiler organ and seperator

11.1 Recoiling shaft specification: 230mmx2100mm

11.2 Recoiling specification: 508mmx2100mm

11.3 Power of expansion and contracting:200mmx100mm

11.4 Supporting arm:steel structure,hydraulic oil cyliner 80mmx350mm

11.5 Seperator shaft specification:95mmx2100mm

11.6 Seperator discs:250mmx3mm,65Mn quenched processment

11.7Seperator power:80mmx2100mm, hydraulic oil cyliner

11.8 Coil pushing arm power:80mmx2100mm

11.9Power of recoiling:110KW DC motor

11.10Motor control:e Euroasia control 590

11.11Recoiling speed:0—60m/min adjustable

11.12 Max coil weight:10T

11.13 Supporting power:hydraulic cylinder 80mmx350mm

 

Layout:

 

 

Wuxi Yuanding Science And Technology Co.,Ltd is a professional exportation-oriented company which specialized in designing, manufacturing,sales and services in the field of cold roll forming machines, we can supply the stud-track forming machines,c/z purlin forming machines,roof &wall forming machines,expressway guardrail forming machines, metal deck forming machines ,steel tile forming machines ,PU sandwich panel production line as well as slitting lines and cut-to-length machines lines and so on.

Located in Wuxi city,Jiangsu province which is close to Shanghai international airport ,we enojoy convenient transportation and advantageous location with which supply good business opportunities for the investors home and abroad.

"Copra" software made in Germany is a kind of professional software for designing the cold roll forming machines.In the past years,we devoted ourselves to studying,training and putting into production.Through continous efforts made by our staffs,we already improved a lot on the machines quality and won good repution in the worldwide. We are ready to establish the business relations with the overseas and domestic customers

 

 

 

 

Wuxi Yuanding Science & Technology Co., Ltd.

Contact person: Lily

Tel: +86-024-8623-4279

Mobile: +86-159-4055-9060

Contact me to get more information

Welcome to contact and visit us, waiting for your cooperation sincerely.