Cti Certified Cross-Flow Cooling Tower - Tct-300r (TCT)

Operation principle
The tower body left and right sides as the cooling area, Cooling tower cooling from both sides, intermediate region as wind hole, The wind sweeps the filler
 

Application
High heat exchange efficiency, low cost, wide range of application flow. Ultra low noise, low noise, energy saving low noise cooling tower can meet the different noise requirements

Structure:
1.Fan blade:
Fan shall be axial flow with hollow aluminum alloy blades selected to provide optimum cooling tower thermal performance with minimum sound levels, high strength and light weight.

2.Water Basin
One-picec FRP Cold Water Basin , Leak-proof gasket connection shall be used in the case of more than two modules to resist leakage and corrosion. Optimum lean design of water basin is prone to discharge water and dirt. 

3.Heat Exchanger
Unique design of PVC fills, with high cooling efficiency, corrosion-resist, is easily removable for cleaning and installation.TCT cooling towers use advanced induced cross-flow design, take advantage of air and water mix fully and carry out a high efficient heat exchange, and unique connection technology enables fill to stick close together, Dehydrator using PVC,Integrated with the filling material,Water flowing rate (splash rate) is less than 0.001%.The design not only efficient, energy saving but also eco-friendly industrial applications, TCT cooling tower performs well especially in operation and maintenance of equipment with advanced design.

4.Motor
Well-known brands of fan motor is a dedicated configuration for low-noise cooling tower, optimize the energy management with protection class of IP55, Insulation class of F.
 

5.Flange Connection
Inlet and outlet flange connection, as standard configuration make site piping connection more convenient.

6.Corrosion-resist Casing
use PVC or glass fiber reinforced panel. 

7.Access door
The spacious inspection aisle interior of the tower, and the optimization design of the internal tubing make the maintenance work easily.

8.Tower framework

Profile steel improve the strength of the tower body and connection. Because the steel plate thickness increasing, the higher strength of the zinc dipping.

9.Design of advanced drive system
 Blade wing-type hollow aluminum alloy has a high strength, light weight, easy to adjust the balance, large wind volume.
 Fan motors adopt heavy-loading totally enclosed type motor, long life.
 

Optional Accessories 

1.Electric heater

2.Shock absorber

ISpecial spring shock-absorbing seats
IISpecial rubber shock-absorbing pads

3.Outtake cylinder

4.Maintenance railing , Maintenance ladder and Spray water basin cover Maintenance railing and ladder

5.Motor

6.Electric Control Box
7.Water makeup device

8.Dosing tank