Crumb Rubber Making Machine/Rubber Powder Cruhser Machine

Specifications Crumb Rubber Making Machine

1.crush waste tires into powder

2.the steel wire and fiber completely separated from the tire

 Rubber Making Machine/Rubber Powder Cruhser Machine                                             Tire recycling machine 1. General: This production line including main machine and accessorial equipment, it is used for recycling scrap-tire (Steel wire tyre and Nylon tyre), and the final product is rubber powder and steel wire.    2. Process flow:   Waste tire—tire circle cutter –tire strip cutter—tire slice cutter—XKP400/450/560--magnetic separator—fiber separator--finished products (rubber powder).    3. This production line including the below:  

Name of equipment		Quantity(set)	Instruction
Host equipment	Rubber crusher	1	Model No.: XKP400/450/560
Auxiliary machine	Tire Circle cutter	1	To cut open the joint of the tire’s side and top
	Tire Strip cutter	1	Reserve the wire hoop, cut the ties without sidewalls into strips
	Tire Slicing cutter	1	Cut the strips into chunks about 3.5 cubic centimeter
	Main vibrating screen	1	Separate the rubber powder for the first time (5-10 mesh)
	Conveyor/feeder	1	To transfer the rubber powder that couldn’t meet the mesh count’s requirement back to host machine to crush again
	Fiber separator	1	Separate the finished product of rubber powder (10-40 mesh)
	Magnetic separator	2	Extract and separate mental wire from the rubber powder
Remark		The above equipments constitute the complete set of scrap tire rubber powder machine.
Steel wire separator		1	Special for extract wires in the tire’s circle

  1.Tire ring cutter     It is used to cut off the bead and steel wall with steel wires from waste tires.
Motor power is 5.5kw
Diameter of tire: 650-1200mm
Overall size is 1100x900x1700mm(LXWXH)
Weight: 1000Kg
Output is tire bead and sidewall, tread.
Capacity: 45-60 tires/h, be equal to 1500-2250kg/h. 2.tire strip cutter   it is used to cut the body of waste tire into strip type, so the strip can be feed to block cutter.
Motor power is 5.5kw
Overall size is 1290x870x1550
Weight: 1100Kg
Input: The tire tread and side wall and output of QQJ-20 bead cutter.
Output is 3-5cm width rubber strip
Capacity is 15-20pcs tires per hours, be equal to 500-750kg tires per hour. 3.tire block cutting machine   It is used to cut the waste tire strip into block with 5cmx5cm size
Motor power: 11kw
Overall size is 1130x830x1100mm(LXWXH)
Input is the rubber strips from the model QTJ-380 strip cutter.
Output is 30mmx30mm rubber blocks
Capacity is 30-40pcs waste tires per hours, be equal to 1000-1500kg waste tire per hour     4.the tire wire removing machine    It is used to separate the steel wires from the side wall of waste tires.
Motor power: 15kw
Overall size: 1520x1150x1210mm(lxwxh)
Input is bead rings from the QQJ-20 bead cutter.
Output is steel wires and tire rim scraps.
Capacity is 30-40pcs waste tires per hours, be equal to 1000-1500kg tire per hours 5.rubber crusher machine     The rubber cracker mill is mainly used for grinding tyre and some other rubber  products, turning the rubber products into granule that the customers' need or any other type products.     Being different from the open mixing mill, the roller of the machine has groove,  used for crushing the raw rubber before plasticizing.       Using vanadium titanium alloy chilled cast iron roller, the surface is hard wear-resisting, after roll for trench roller, internal processing, so that the roll surface temperature uniformity, The machine is equipped with an overload protection device, protect the main components from being damaged due to overloading.    The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately. The machine adopts the integral base or body base, convenient installation.