cross T 38 24 cross T 32 24 cross T 26 24 making machine

Main T Grid and Cross T Grid Roll Forming Machine

Main T Grid and Cross T Grid Roll Forming Machine is a strip of raw materials, through continuous cold rolling molding, production of complex cross-section profiles, which consists of decoiler, guide rack, forming hosts, calibration device, cut-off part, receiving station , composed of electrical control and so on.

Main T Grid and Cross T Grid Roll Forming Machine Material
Processing material: colored steel plate, galvanized plate, or aluminum plate

Material thickness: 0.4-0.8mm
Material hardness: 550 mpa---350 mpa
Formed width: 100mm
Forming speed: 20m/min
Main T Grid and Cross T Grid Roll Forming Machine Technological process
Uncoiler-feeding system-roll forming machine-cutting system-table

Main T Grid and Cross T Grid Roll Forming Machine Uncoiler system
Usage:It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system
Loading capacity:1500kg
Uncoiling width:300mm
Inner diameter: 450-550 mm

Main T Grid and Cross T Grid Roll Forming Machine Entry Beach
Usage:Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Main T Grid and Cross T Grid Roll Forming Machine Main Roll Forming System
Length of the main part: about 3300 х800 х1400
Weight of main part: 3000kg
Voltage : 380 V/50HZ 3Phase or as your required
Roller fixer : middle plate
Frame : 450 H steel welded
Drive mode: gear
Frame thickness:30mm
Material of rollers:GCr12MoV, surface hard chromium plating.
Material of shafts: 45# steel with tempering
Diameter of shafts: φ 40mm
Number of rollers : 14 rollers
Main power: 3 kw

Main T Grid and Cross T Grid Roll Forming Machine Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 quenched
Power supply : hydraulic power
Components:It contains one set of blade , one hydraulic tank and one cutter machine.

Main T Grid and Cross T Grid Roll Forming Machine Hydraulic Station
It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Power: 5.5 kw
Hydraulic oil: 46 #

Main T Grid and Cross T Grid Roll Forming Machine Electric Control System
1. Adopted PLC , frequency converter , Delta touch screen from Taiwan to ensure high speed with stability, precision and lifetime.
2. Other electric element are Panasonic

Main T Grid and Cross T Grid Roll Forming Machine Company Information:

Cangzhou Zhongtuo International Trade Co., Ltd is a professional manufacturer located in northwest of CangZhou, as a long history of cold roll formingmachine production base. All products comply with international quality standards and are greatly appreciated in variety of different markets throughout the world, such as Asia, Africa, Europe,South America, and Australia and so on.