Cow Manure Rotary Dryers

Specifications Cow Manure Rotary Dryers

  Product Description
 Rotary Biomass Dryer's  Introduction Rotary drum dryer is your best choice to dry biomass materials of high moisture content and produce high quality biomass fuel. Biomoass materials go through dryer can improve biomass fuel efficiency of 5-15% and lower down emission. It can be used for drying a wide range of biomass materials such as alfalfa, straw, sawdust, marigold, wood shavings, manioc waste, bagasse, colza cake and leaves, etc. Featured by low energy consumption and high drying efficiency, it is widely employed in chemical industry, metallurgy, building and mine digging, etc. The heat efficiency reaches 80% which is much more higher than other drying equipment. Product Overviews  
Rotary Biomass Dryer's  Structure
Consist of rotating cylinder, transmission device, supporting device and shoveling plates,etc, rotary drum dryer is a horizontal type drying device. This wood drying machine is reasonably designed and with large drying capacity of 1-3t/h. There are shoveling plates in different angels welded throughout inner side of the whole drum. The feeding place is set door ring and rotary shoveling plates to avoid materials splashing.   Detailed Images Dryer's Roller             Dryer's Inside            Dryer's Inside          Motor    Rotary Biomass Dryer's  Features
1. High temperature and heat air can dry biomass materials quickly and evenly.
2. High self-insulation thermal efficiency of 70% inside the drum. 
3. Economic space occupation, easy to build and maintain. 
4. Moisture content requirements is adjustable, depending on clients’demand.
5. Stable drying process, low energy consumption, low cost.
Rotary Biomass Dryer's  Working Principle
Biomass materials with high moisture content are fed into rotary cylinder; shovelling plates inside the drum walls raise up materials and these materials scatter down to move in a spiral forward style. During the constant raising up and scattering down, biomass materials can absorb enough amout of heat, at the same time, the drying time is extended to achieve the best drying effects.        Technology  

Spec./m (Dia.×Length)	Shell Cubage (m³)	Capacity (t/h)	Installation Obliquity (%)	Highest Inlet Air Temperature (°C)	Main Motor (kw)	Weight (t)
Φ1.2×8.0	9.0	1.9~2.4	3~5	700~800	7.5	9
Φ1.2×10	11.3	2.4~3.0	3~5	700~800	7.5	11
Φ1.5×12	21.2	4.5~5.7	3~5	700~800	15	18.5
Φ1.5×14	24.7	5.3~6.6	3~5	700~800	15	19.7
Φ1.5×15	26.5	5.7~7.1	3~5	700~800	15	20.5
Φ1.8×12	30.5	6.5~8.1	3~5	700~800	18.5	21.5
Φ1.8×14	35.6	7.6~9.5	3~5	700~800	18.5	23
Φ2.4×22	99.5	21.2~26.5	3~5	700~800	45	58
Φ2.6×24	127.4	27.2~34.0	3~5	700~800	55	73
Φ3.0×20	141.3	30.1~37.7	3~5	700~800	75	85
Φ3.0×25	176.6	37.7~47.1	3~5	700~800	75	95
Φ3.2×25	201	42.9~53.6	3~5	700~800	90	110
Φ3.6×28	285	60.8~76.0	3~5	700~800	160	135

  Company Information  

Shanghai Minggong Heavy Equipment CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years,  we devote to producing mining equipments, sand making machines and industrial grinding mills,  offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.

 

The head office of Shanghai Minggong is in Shanghai- the international financial centre.  Here we have modern production base of Eighteen thousands square meters,  professional R&D institution and technology team, which make us world-class company.  Here all Minggong machines are designed produced, assembled and texted according to the ISO9001:2008.   Till now, our products are sold to 130 countries, being the popular equipments in global crushing and grinding industry.  With the development of our Shanghai Minggong ,  we would like to help more and more customers start their business in mining and construction industries,  offer them the best solution, much more advanced machinery and better service.

Finished Products   Delivery & Shipping   Wood Chippers The drum wood chipper is an ideal equipment for pellet mill production lines The drum wood chipper process logs, square blocks, wood staff etc, this machine is widely used in the factories of flake board, medium density board, fiberboard, and paper making plant. Hammer Mills We specially designed the hammer mill for biomass pellet processing e.g. wood chips,paddy straw, sunflower stalk, forestry waste, and many other wastes or solid powder material can be processed. For small wood logs, we supply a machine that can chip the wood and crushing the machine only by one machine ! Chipping and Crushing All in One !   Successful Case   5 Ton Per Hour Pellet Plant in Vietnam Established in middle of 2012, this plant is doing quite well. Using sawdust and shavings as main raw material, this plant produces very good wood pellets which are supplied world-widely and have a large range of application. FAQ   Pellet Press,Wood Pellet Mill,Pellet Making Machine 1. What is a Pellet Press?
The pellet presses(pellet mills) or wood pellet press are used for the compression of waste materials into solid pellets. These pellets, sometimes known as bio-pellets or fuel pellets, can be used as fuel for heating. 2. How big is a pellet press?
Pellets presses / pellet mills range from 7.5 kw to 30 kw. 3. What can the pellets used for?
Depending on its material composition, the pellets can be used as animal feed or as fuel pellets for use in a pellet stove or boiler. 4. What are the pellets made from?
Pellets can be made from wood,sawdust,plastic,foam,wheat,barley,cotton and fibrous waste with proper material moisture of 10%-15%. Steam or a binder such as molasses may also be added into the mix. 5. How are the pellets made?
The pellets are made by compacting the mash or meal into many small holes in a die. The die is usually round and the pellets are pushed from the inside to the outside. 6. What size pellets are produced?
The length and diameter of the pellets vary according to the size of the die in the pellet press. 7. What is the cost of a pellet press?
Different capacities have different prices. 8. How do you deliver the pellet presses?
Transport and worldwide shipping is available. 9. Are the pellet presses new or used?
All machines are new and tested before shipping,warranties are available.Advice is free. 10. What is the precision of the packing machine?
----+/-0.2%
11. What is the packing speed of pellet packing machine?
----100~200bags per hour
12.What increments can the scale be set to?
----5~10kg, 15-30kg per bag.
13.What is the pressure from the compressed air?
----0.4MPa-0.6MPa
14. What is the volume of compressed air consumption?
---0.5m3 per hour
15. Is the sealing machine included?
----Yes, the packing machine includes belt conveyor and sealing machine. 16.As Pellet Making Machine Supplier,what models are offered ? ----The main models of pellet making machine are: Flat Die Pellet Making Machine,Ring Die Pellet Making Machine,Rotating Roller Pellet Making Machine,Small Mobile Pellet Making Machine,complete wood pellet line,etc.     Pellet Plant Introduction Biomass pellets as a green fuel and now more and more countries are used it to replace of coal, gas and oil etc. AKG is a leading machine supplier for making biomass pellet and we will give you a general idea of the how to make biomass pellet. About material for making biomass pellet.
Usually, wood trunks, wood logs, wood branches, saw dust, bamboo, wheat straw, peanut shell, rick husk, sun flow stem, palm kernel shell etc can be pelletizing into fuel pellet. However, different materials have different characteristics, like heat valve, ask content, nitrogen content etc. The high heat valve pellet is welcome by the market. Material source.
In China, due to lack of material, lots of pellet plant can’t go on constantly production and loss money. Now lots of pellet manufacturers are fighting for materials. If you are planning to install your own pellet plant, make sure that you have sufficient material supply. Moisture content of material.
Generally speaking, the ideal moisture content of the material is 15%, different material has slightly difference on this. However, if the moisture content of the material is higher than 15%, shall be equipped a dryer. Be careful in selecting a dryer.
When we talking about careful, this is mainly because the dryer’s cost is take up almost 30% in the total equipment investment and this cost will greatly affect the pellet’s selling price. Some of my clients asked other factories to dry the material for them instead of installing the dryer themselves to save the money. However, if the dryer is dispensable in your plant, you can use gas, coal, oil is a common fuel, but we recommend you use the biomass pellet ! Select a good location. This is a very important factor you shall taken into consideration when establish you pellet plant. Our suggestion is: selection a location where near the material supply, this will save your transportation cost greatly.  

Skype:	shmg06
Mobile Phone Number:	+86-15921678282
PIC:	Danny Chen