Copper Tube Condenser Fan Motor

About Us:
We are a professional heat exchanger, condenser, evaporator, heat pump, air cooler
And air conditioner manufacturerin China, which has more than 15 years experience in HVAC area. Our products have been exportedto Europe, USA, Japan and Middle east etc.

Copper tube condenser fan motor
Brief description:
1. Heat Exchangers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.

The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain, Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Feature:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8— 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.


Sample Policy:

1. We charge for samples. If we have the samples you need in stock,

We can send it to you within one week after received payment.

2. We can also manufacture samples according to your drawings or samples;

Lead time depends on the actual production status in our factory.