Copper Threaded Male Elbow

Copper Threaded Male Elbow MPT X C

• Description：Copper Threaded Male Elbow MPT X C for Plumbing,ASME B16.22 &EN1254-2 Stanard With UPC,NSF61,WRAS approval
  Actually, most pumbers are familar with brass threaded male elbow ,We also have brass one,But we invest mould to produce the copper threaded male elbow,WHY?
  First, the copper one is no lead,It is friendly to the health .Second,the working lift also is much longer than brass one.
  Regarding to the installation way, it is same as copper threaded male and female adapter as follows:
  When fitting copper pipes the plumber will cut the pipes to the desired length. He will then clean the ends of the cut pipe and apply flux compound to the outside of the pipe end. The pipe end is inserted into one end of an adapter. The adapter has a larger inside diameter than the pipe allowing the pipe to slide in. The other piece of pipe is inserted into the opposite end of the adapter creating a connection between the two pipes. The plumber then solders the pipes together forming a bond.
  The copper fittings known as copper pipe fittings,copper pressure fittings and copper plumbing fittings, divided to end feed copper fittings(wrot joint copper fittings ) and solder ring copper fittings(presolder copper fittings).And the  quality of our EN1254-1 copper fittings can compare with yorkshire copper fittings(Pegler copper fittings) and connex copper fittings.our ASME B16.22 copper fittings also has exported to Mueller in U.S.The copper threaded male elbow MPTXC are made for no lead purpose. The same type in the market are mainly made of brass. The brass is leaded and easy to burst.But the C12200 material used to replace the brass has resolve this problem.And we alsohave same type female elbow for you.
  

• Production Standard: 
  1.EN1254-2(Copper And Copper Alloys-Plumbing Fittings)
  2.ANSI/ASME B16.22-2001(Wrought Copper And Copper Alloy Solder Joint Pressure Fittings)
  3.ISO228-1 Pipe Threads Where Pressure-tight joints are not made on the threads
  4.ISO 7-1(EN10226-1&2 R,Rp,Rc) Pipe threads where presssure-tight joints are made on the threads- Part 1：Dimensions,tolerances and designation
  5.ASME B1.20.1 Pipe Threads,General Purpose(Inch)
  

• Material: C12200(Cu-DHP CW024A ，SF-Cu 2.0090 and TP2)
  Cu≥99.95% P0.015%-0.04% Impurity(P,Ag,Bi,Sb,As,Fe,Pb,Sn,S,Zn)≤0.1
  

• Application: Industrial or Residential Water and plumbing,drinking supply,cold and hot water supply, heating supply, fire protection,gas supply, industrial petroleum pipeline system etc.
  Suit Medium:Cold Water, Hot Water, Compressed Air, Gas, Oil Etc.