Product description
Copper Solder Ring Bent Tap Connector
-
Description:Solder Ring Bent And Straight Cylinder Union,Copper Solder Ring Bent Tap Connector,Straight Tap connector, Bent Tap connector with WRAS,SABS approval.
The solder confirmed SN99.3CU0.7.Actually,the lead of the solder in Runde is lower than 0.01%.Much lower than other suppliers.And our solder ring inside the socket are smooth.There has no bubble hole inside.
The copper fittings known as copper pipe fittings,copper pressure fittings and copper plumbing fittings, divided to end feed copper fittings(wrot joint copper fittings ) and solder ring copper fittings(presolder copper fittings).And the quality of our EN1254-1 copper fittings can compare with yorkshire copper fittings(Pegler copper fittings) and connex copper fittings.our ASME B16.22 copper fittings also has exported to Mueller in U.S. the solder ring copper bent tap connector are produced according to EN1254-1 only.The end feed type also available in Runde.
-
Production Standard:
1.EN1254-1:1998/BS864-2(Copper And Copper Alloys-Plumbing Fittings)
-
Material:
Copper Part:
C12200(Cu-DHP CW024A ,SF-Cu 2.0090 and TP2)
Cu≥99.95% P0.015%-0.04% Impurity(P,Ag,Bi,Sb,As,Fe,Pb,Sn,S,Zn)≤0.1
Brass Part:
1.HPb59-1(Cu57-60% Al≤0.2% Fe≤0.5% Pb 0.8-1.9% Sb≤0.01% Bi≤0.003% P≤0.02% Zn balance)
2.CuZn39Pb1Al-C(CC754S)(Cu58-62% Sn≤1% Al0.1-0.8% Fe≤0.7% Pb 0.5-2.4% Ni≤1% Mn≤0.5% P≤0.02% Si≤0.05% Zn balance)
3.DZR602(CuZn36Pb2As-CW602N)(Cu60-63% Sn≤0.3% Al0.3-0.5% Fe≤0.3% Pb 1-2.5% As 0.08-0.15% Zn balance)
Solder Part:
Sn99.3Cu0.7(Sn balance Cu0.5-0.9% Al≤0.001% Fe≤0.02% Zn≤0.001% Pb≤0.07% Ni≤0.01% Cd≤0.002% As≤0.03% Sb≤0.1% Bi≤0.1% Ag≤0.1% In≤0.1% Au≤0.05%)
-
Application: Industrial or Residential Water and plumbing,drinking supply,cold and hot water supply, heating supply, fire protection.