Copper Conductor Water Pipeline Freezing-protection Heating Cable

Specifications it is a kind of electric power system with temperature changes automatically adjust the power and temperature of the strip tem

  Copper Conductor Water Pipeline Freezing-protection Heating Cable   Product Description    General Water pipeline freezing-protection heating cable is applied to freezing-protection and constant temperature of technology pipeline or window storage tank and instrument. Max. keeping temperature is 70 ±5 °C. Heat tracing is applicable to general areas, the danger zone and corrosion area. Heat tracing is suitable for common, hazard and corrosion areas.   Standard: GB/T19835-2005 Structure   1. Copper conductor (7/0.3, 19/0.3, 7/0.6)   2. Conducting plastic inner covering (PTC material)   3. PO or fluorine plastic insulation   4. Tinned copper wire braiding and shielding   5. PO or fluorine plastic reinforced layer   Performance Parameters   Construction temp.: Min. -40 °C   Thermal stability: 22 days 1000 times go-no-go test, the heating power is over 90%.   Bending radius: 12.7mm for 20 °C room temp, insulation resistance (between conductor and shield) is 100MΩthrough 1min shake test by 2500V D.C megger.   Operating voltage: 12V, 24V, 36V, 110V, 220V   10 °C power output: 15, 25, 35, 45W/m   Temp. scope:   Max. maintaining temp.: 65°C, max. surface temp.: 70°C, max. durable temp.: 105°C     Installation method   1. The selection and installation of the power cable, Use copper wire, cross-sectional area≥1.5cm2. It’s better to choose low smoke and non halogen wire. The connection wire of power cable should be divided into the following color :   1, Phase - the same as the power color   2, N line - Blue insulated wire   3, PE line - Interphase as green and yellow insulated wire   Joint method of power cable and heating cable   Firstly deal with heating cable conductor leader insulation. Then deal with the power and heating cable conductor joint according to the electrical wiring rules.   The end blocking method of the heating cable   1, Firstly, cut the end, separate the end and the conductor, attention: The end of two conductors is strictly prohibit articulated.   2, Using high-pressure self-adhesive tape wrapped end to 2cm, then wrapping one more layer with PVC waterproof tape, prevent high-pressure self-adhesive tape shedding and aging.           Packaging & Shipping  

Packaging Detail:	international wooden drums   or according to your requirement.
Delivery Detail:	In 15days or as the quantity   you required

  Our Services   1.Free samples can be afford if needed. 2.2 years warranty after selling      FAQ    Payment terms: 30% T/T advanced Price term: EXW, FOB, CIF, CNF are accept Delivery time:15days after your advanced payment, or as customer requirements       Company Information