Copper Conductor Electrical Wires And Cables Single Core , 64 / 110kv

 

Copper Conductor Electrical Wires And Cables Single Core , 64 / 110kv

 

 

Specifications

Electric Wire Cable
1.Response within 12 hours
2.Directly Factory Sales
3.CCC,ISO9001,OHSAS,TLC Honor

Description:Electric Wire  Cable
 

Specification:YJLW02 110kv 1*630 mm

 

 

 

Application:

It is used to transmit and distribute power in power transmission and distribution system of 110kV or lower.

 

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

 

 

 

Related Products Taype, Description & Installation :

 

Type		Description	Suitable for
Copper-conductor	AL-conductor
YJV,YJY	YJLV, YJLY	XLPE insulated PVC/PE sheathed power cable	Installation in the tube, channel or in air, resistant certain tension
YJSAV-Z	YJLSAV-Z	Vertical water power cables with XLPE-insulated, copper wire shielded, Al-plastic composite tape and PVC jacked	Installation in the tube, or channel resistant the damp environment and certain tension
YJSAY-Z	YJLSAY-Z	Vertical water power cables with XLPE-insulated, copper wire shielded, Al-plastic composite tape and PE jacked
YJLW02-Z	YJLLW02-Z	Vertical water power cables with XLPE-insulated, corrugated aluminum and PVC jacked	Tunnel or pipeline, moist places like higher water level underground, good capacity of anti-moisture and certain pressure available; specially used in the places with low corrosion and bearing certain mechanical force(such as bridge, vertical well and so on with the direct connection to transform); PE jacked with good capacity of anti-moisture.
YJLW03	YJLLW03	Vertical water power cables with XLPE-insulated, corrugated aluminum and PE jacked
YJQ02-Z	YJLQ02-Z	Vertical water power cables with XLPE-insulated, lead set and PVC jacked	Tunnel or pipeline, moist places like higher water level underground, certain tension and shock resistant; specially used in the places with heavy corrosion but without nitric acid, acetic acid, organic matter(e.g. peat), and strong alkali corrosion quality; certain mechanical force(tension, pressure, shock) available; PE jacked with good capacity of anti-moisture.
YJQ03-Z	YJLQ03-Z	Vertical water power cables with XLPE-insulated, lead set and PE jacked

 

 

 

Product Range :

 

Type	UO/U Rated voltage	Number of cores	Nominal cross-section mm2
YJV,YJLV,YJY,YJLY YJSAV-Z,YJSAV-Z YJSAY-Z,YJLSAY-Z YJLW02-Z,YJLLWO2-Z YJLW03-Z,YJLLW03-Z YJQ02-Z,YJLQ02-Z YJQ03-Z,YJLQ03-Z	38/66 48/66		240,300,400,630,800,1000,1200,1400,1600,1800,2000,2500
	64/110	1	240,300,400,500,630,800,1000,1200,1400,1600,1800,2000,2500
	127/220	1	300,400,500,630,800,1000,1200,1400,1600,1800,2000,2500,3000
	290/500	1	630,800,1000,1200,1400,1600,1800,2000,2500,3000,3500

 

 

 

This series includes:

 

Copper (aluminum) core, XLPE insulated and sheathed power cables.

Copper (aluminum) core, XLPE insulated, PE sheathed power cables.

Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables.

Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables.

Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables.

Copper (aluminum) core, XLPE insulated, steel wire armoring, PE sheathed power cables

Rated voltage: 0.6/1kV, 3.6/6kV.

Number of cores: 1 to 6.

Relative manufacturing standards: IEC60505, BS, DIN.

 

Packing: Wooden drum, steel wooden drum.

 

 

 

Power Cable

 

-Conductor:
Solid or stranded copper

--Insulation:
Cross-linked polyethylene( XLPE or PVC)

--Circuit Identication:
The insulation shall be red, black

---Filler:
Polypropylene lament with lapped binding tape

--Inner Sheath:
Polyvinyl chloride (Black)

--Armor:
Galvanized steel wire

--Core-covering:
Binding tape

-Outer Sheath:
Polyvinyl chloride (Black)

-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.

-Standards / Testing Specications:
IEC 60502-1.

 

 

Installation :

This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

1. The products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and other standards, such as BS standard, DIN standard, ASTM standard, etc.

Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees.

 

 

Brief Construction:

Single core ,Cross section 633 square millimeter

Copper or aluminium conductor

XLPE insulation

Copper tape or copper wire screen

Aluminum Tape wire armored

PVC or PE sheath

 

The Framework of our Management:

 

 

The Main Process of Production :

 

 

The finished goods with packaged :