concrete epoxy / epoxy anchor / anchoring adhesive

Specifications concrete epoxy / epoxy anchor / anchoring adhesive

Simple Packaging/Easier to use

Quicker Delivery

390ml per piece

concrete epoxy / epoxy anchor / anchoring adhesive   Product Description    HM-500 Injectable Cartridge Packed Anchoring Adhesive   Made from modified epoxy resin, free from styrene and toxicity Highly resistant to aging, temperature, acids, alkalis, seismic shocks, expansion etc. Lower moisture sensitivity and remains stable even in a damp environment Thixotropic, better suited to anchoring on the walls and ceilings. Cartridge packaged, comes with nozzle and proprietary dispensing gun Technical Details Volume: 390ml Appearance: A (main agent): white paste
                     B (Hardener): red or black paste Mixture ratio: 3:1 Viscosity: 18-22 Pa.S Density of curing material: 1.50±0.10 g/cm3 Solvent Content: Less than 0.5% Shelf life: 12 months   Operation and Curing period at different temperatures

Working Temperature in Celsius	-5	0	10	20	≥30
Operating Time in Minutes	60	45	30	25	20
Curing Time in Hours	72	48	24	12	6

Performance Details  

Colloidal performance	Splitting tensile strength	≥8.5 Mpa
	Bending Stress	≥50MPa
	Compressive stress	≥60 Mpa
Adhesion performance	Steel-steel Bond Tensile anti-shear strength	≥16 Mpa
	Under the constraint drawing condition, ribbed steel bars and C30(φ25, L=150mm )	≥11 Mpa
	Adhesion strength of concrete C60(φ25, L=125mm)	≥17 Mpa

  Application Range Used in anchoring of threaded rods, bolts, reinforcing bars and dowels into concrete base Operation Process Drill hole in accordance to industry regulations Blow out the floating dust in the hole using gas reservoir first, then brush out the dust attached to the hole walls with brushes, repeat many times, until the hole is completely clean Install static mixer in the glue bottle, squeeze out the rubber compound without uniform mixing in the front part using the glue gun first, and then inject glues into the hole; Ensure the order of injecting glues from the hole bottom to the hole top, try not to mix into gas bubbles, the rubber compound should fill over 2/3 depth of the hole; The screwing of steel bar or screw: screw the steel bars or screws into the hole, and immediately twitch up and down several times to ensure the glue evenly. At normal temperature (25 °C), the curing time is 24 hours, the rod should not be touched during this period, and it can bear immediately after curing.   Cautions Drill holes in accordance with the required pore size and depth strictly Clean the holes thoroughly Inject the glue from the bottom, and pull out slowly; Wait until complete curing before use The construction workers of this product should take necessary productive measures (such as wearing masks, gloves, goggles) notify fire prevention unit and maintain good ventilation on scene If accidentally swallowed or splashed into the eyes, seek immediate medical help Packaging/Storage/Transportation Thirty 390 ml cartridges packed in a carton. Each carton contains 10 nozzles Store in a cool, dry, ventilated place. Shelf life is 12 months only This product is non-toxic, belongs to non-dangerous category and can be transported as a general chemical building material.