Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor
Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor

1 / 7

Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor

Get Latest Price
Send Inquiry
Model No. :
Brand Name :

Product description

Detailed Product Description
Appearance: White Powder Application: Paper Tiles, Floor, Wall
Color: Grey Feature: Non-toxic, Eco Friendly
Product Name: Ceramic Tile Adhesive Surface Drying Time: About 2h
Surface Preparation: Clean Temperature: 5℃~40℃

 

Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor

 

Product Name

PB-106 Super Tile Adhesive (C2)

Feature

Strong cohesion force and water retentiongood flexibility, no-toxic, no-radiation, no smell and environmental

Appearance

White, gray power

Application

Swimming pool, outdoor wall, ground, platform and balcony, wet places

Surface Preparation

Smooth and firm, no dust, grease, release agents, batik material, etc

Surface Dry Time

About 2h

Construction Temperature

5℃~40℃

 

 

PB-106 Super Tile Adhesive (C2) specially for bonding tiles on interior and exterior wall and floor.  Long opening time, not hollowing and not efflorescence. Accepted by National Standard JC/T 547. PB-106 is suitable for bonding tiles on cement mortar, concrete, Eterpan etc such strong substrates.

 

 

Product Description

 

Product features:

 

1. Has strong cohesion force.


2. Be premixed and produced, easy operation.


3. Has strong water retention, to reduce material consumption and building load.


4. Has good flexibility to resist effectively the destruction of various stresses.


5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.


6. It is no-toxic, no-radiation, no smell and environmental.


7. Has special formula to prevent the flow with too much southbound crash, easier construction.

 

 

Treatment of base plane:


1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.


2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.


3. New plastering cement mortar could be constructed after 14 days maintenances.

 

 


Construction technology:


1. Construction tools: Leveling instrument, dentiform drawknife (3×3mm, 4×4mm, 6×6mm, 8×8mm, 10×10mm), tile generator, motor stirrer, big drum, cross-colloidal.


2. Stir and mix: Mix tile adhesive and water as 20: (5~6.5) stirs completely and waiting for 5 minutes, stir again.


3. Layup construction: Scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.

 


Attentions:


1. The vertical and smoothness of the substrate must be confirmed before construction.


2. The product is suitable for construction in the 5℃~40℃.


3. Don't use the dried paste by reading water.


4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
 

 


Technical parameters:

 

Original tensile adhesive strength(Mpa)

≥1.0

Tensile adhesive strength after water(Mpa)

≥1.0

Tensile adhesive strength after thermal aging(Mpa)

≥1.0

Tensile adhesive strength after thawing cycle(Mpa)

≥1.0

Tensile adhesive strength after standing for 20 min(Mpa)

≥1.0

 

Store Method: 
 
Store in cool and dry place, unopened product can be saved for one year.
 
 
Packing:
 
20kg/bag

 

 

Concrete Epoxy Adhesive , Exterior Ceramic Floor And Wall Tile Adhesive On Floor

Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628