Computer Servo Universal Tensile Strength Tester
Computer Servo Universal Tensile Strength Tester is widely used to test tension, tear strength, peeling force, compression, shearing force, adhesion, three-point bending, etc.
Which is widely used in the field of metal, rubber, plastic, nylon, leather, shoemaking, fabric, insulator, electric appliance, automobile, etc. And it is equipped with build-in printer.
Brief introduction of TM2101 control system
This control system is intended for tensile strength tester, compression tester, and electronic universal material tester. It is applicable for the physical parameter of many kinds of material in pulling, compressing, bending, cutting, tearing, peeling and puncturing test under strength property. It can do pulling, compressing, three points bending resistance, four points bending resistance, cutting, tearing, peeling, puncturing of finished shoes, carton compression test, foam recyclable compression, spring pulling test and other recyclable dynamic and static test.
Main Technical Parameter
Items |
Specification |
Sensor |
Celtron load cell |
Capacity |
500, 1000, 2000KG |
Unit Switchover |
G, KG, N, LB |
Display Device |
PC |
Resolution |
1/250,000 |
Accuracy |
±0.5% |
Max. Stroke |
1000mm (excluding fixture) |
Test Speed |
0.1-500mm/min (adjustable ) |
Motor |
Panasonic Servo Motor |
Screw |
High Precise Ball Screw |
Elongation Accuracy |
0.001mm |
Power |
1, AC220V, 50HZ |
Weight |
Approx.150kg |
Accessories |
One set tensile clamp, one set extensometer, one set Lenovo computer, one piece English software CD, one piece operation video CD, one piece English user manual |
Product Features
1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan).
2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Data transmission: RS232.
4. Displacement resolution: 0.001mm.
5. Graph scale automatic optimization can make graph to display with best
measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.
6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
7. User can set parameters of product material such as length, width, thickness, radius, area and so on.
8. Languages: English.