Compact Anti-pandemic Fever Scanner Solution

SUNSON Compact Anti-pandemic Fever Scanner Solution is a complete fever screening solution with temperature measurement, face recognition and big data statistics.

Through the intelligent temperature measurement system, the face information in the LIVE image and the temperatures in the sampled areas can be captured quickly, and the human body temperature can be tested and computed through the intelligent terminal, the captured face can be recognized and displayed.

When the body temperatures of the personnel, single or group of persons, in the camera preview range is higher or lower than the set normal body temperature (threshold), an alarm sound will be launched to remind the personnel with abnormal temperature and medical staff to deal with it in real time, and at the same time, the abnormal case will be uploaded to the control center for data analysis.

Equipped with front-end software, the temperature detecting system are equipped with patented built-in black body, thus ensure most reliable and highly accurate test results. This integrated system of facial recognition plus body temperature detection can be used as a standalone device or a checking point of a large anti-pandemic system.

Main Features

1). Safety: non-contact thermal imaging temperature measurement to avoid the risk of cross-infection.

2). Efficiency: the detection time is less than 1 second, and multiple tests can be carried out at the same time.

3). Stability: patented built-in blackbody real-time temperature calibration, temperature measurement is more accurate.

4). Detection rate: face detection and temperature measurement to avoid other non-human interference.

5). Easy to deploy: through the intelligent temperature measurement terminal display of the human infrared thermal imager, a small temperature measurement station is formed.

6). All-weather: 7 x 24 real-time temperature screening, body temperature over-limit warning.

Technical Specification

Thermal Imaging Sensor
Resolution	320*240
Temperature range	32℃~42℃
View angel	Hor. 34.4°, Ver. 25.8°
Video output	6bit, color mode: 32bit ARGB
NETD	70mK@25℃
Accuracy	≤±0.5℃
Calibration	Real-time by built-in black body
Detection time	< 1 second
Detection range	≧1M, ≦5M, best at 2.5 M
Detection mode	Multi-person (≦10), temperature only Single person (temperature + face recognition)
Camera
Imaging sensor	SONY 1080P 500W IMX5187
Resolution	1920 x 1080
Lens size	5mm
Pixel width	3μm x 3μm
Frame	30fps 1080p
Dynamic range	105DB
Gain	Auto
Exposure	Auto
White balance	Auto
Environment Condition
Working temperature	25~32℃
Storage temperature	-20~60℃
Working moisture	＜90% (no condensation)
General condition	Indoor, without wind

 

 Intelligent Terminal

                                                     Note: The above configurations are for reference, we remain the rights of upgrade without prior notice.

Attention

1). The temperature measuring equipment should be used indoor with room temperatures between 25 ℃ and 32 ℃. Do not install the equipment under the vent. Ensure that there is no heating source within 3 meters.

2). Personnel entering the room from the cold or very hot outdoor environment will affect the accuracy of temperature measurement. It is necessary to keep the forehead without cover for three minutes in room and the temperature is stable before testing the forehead temperature.

3). The temperatures are detected from different forehead points. When there is water, sweat, oil stains or makeup on the forehead or the elderly have more wrinkles, the temperature readings will be lower than the actual ones. Make sure the forehead is not covered with hair or clothing.

Sunson Profile