Coal Water Slurry Fired Hot Water Boiler

Specifications Coal-water mixture boiler

1.Low temperature combustion

2.High combustion efficiency: 98%

3.High thermal efficiency:>89

Product name   Coal-water mixture boiler  Application Scope:   Coal-water mixture (CWS) can be used in place of oil and gas in any size of heating and power station. CWS is suitable for existing gas, oil, and coal boilers.     Feature and advantage of coal-water mixture boiler   Stable operation and low emission:Coal-water fluidization system realizes the low temperature combustion; avoid coking, unstable operation, poor security problem of Coal-water atomizer system. High efficiency:cyclic burn cluster of coal-water particle, achieve a high efficient performance reach 89%. No need for slag remover: fluidization combustion mode blow ash through the flue duct to the dust filter Long life span water coal slurry pelletizer machine: High quality atomization coal water slurry burner can use 1500h-2000h, but fluidization coal water slurry boiler do not need vulnerable and short lifespan burner, which means long life span. Low cost for desulfuration: Use limestone and silica sand as medium material cooperate with low temperature combustion technology realize the direct desulfuration during Coal-water combustion, which is simple structure and low cost. Low consumption for medium material:recycle of limestone increase the use ratio which reduce the supply of limestone and medium material. This system also increases the efficiency. Wide Load Adjustable Range: the boiler can adjust for different type Coal-water fuel and load range can be set 30% to 100%, Low cost and requirement for Coal-water:Wide adaptable for Coal-water fuel reduces the requirement for Coal-water manufacture, which reduce the Coal-water cost. Simple and stable accessory: SHFS series (CWS fluidization system) do not need expensive burner, fault liability CWS atomization gun, complex high pressure air and CWS system, which make the whole system simple and reliable. PLC control system        Technical parameter of SZS series coal-water mixture boiler    

Model		SZS2.8- 1.0/95/70-J	SZS4.2- 1.0/95/70-J	SZS7- 1.0/115/70-J	SZS10.5- 1.0(1.25)/115/70-J	SZS214- 1.0(1.25)/115/70-J
Rated Heating Power	MW	2.8	4.2	10	15	20
Rated water-delivery pressure	Mpa	1	1	1	1.0/1.25	1.0/1.25
Rated outlet temperature	°C	95	95	115	115	115
Rated inlet temperature	°C	70	70	70	70	70
Circulation amount	m³/h	48	144	133	200	267
Boiler efficiency	%	>85	>86	>86	>86	>86
Applicable fuel		Coal-water slurry
IDF(Induced Draft Fan)		YX9-35 No.8C 22kw	GY6-1 30kw	GY10-15 55kw	Y5-47 12D 75kw	Y5-47 12.4D 90kw
FDF(Forced Draft Fan)		T4-72 4.5A 7.5kw	T4-72 5A 11kw	GG10-1 15kw	G4-73 9D 30kw	G4-73 9D 37kw
Slurry pump		XP030B12JA 1.5kw	XP035B12JA 2.2kw	XP040B12JA 4kw	XP040B12JA 4kw	XP050B12JA 4kw

Note: fuel consumption is based on calorific value of Coal-water slurry is 42000KJ/Kg    Flowchart for System Equipment Allocation of CWM Fluidization         Picture of coal-water slurry boiler proper and accessory