1 / 1
Model No. : | TY-SP2504B |
---|---|
Brand Name : | HHT |
Product description
CNC Gantry Machining Center TY-SP2504B
1.Brand:HHT
2.Cert.:ISO,CE
3.Max.load:12000kg
4.Table size:2300*4000mm
5.X/Y/Z travel:4000/2700/1000mm
6.CNC controller:SIEMENS FANUC MITSUBISHI
Item Model | Unit | TY-SP2504B | |||
table size(WxL) | mm | 2300×4000 | |||
X-axis travel | mm | 4000 | |||
Y-axis travel | mm | 2700 | |||
Z-axis travel | mm | 1000 | |||
size of machine | mm | 2700 | |||
spindle nose to table | mm | 280~1280 | |||
table-T-slot | mm | 11-28×200 | |||
spindle taper | mm | BT50/Φ190 | |||
spindle gear | rpm | highest speed 3000rpm | |||
spindle straight transfer | rpm | highest speed4500rpm (ZF speed reducer can be added,reduction ratio 1:1; 4:1) | |||
spindle belt drive milling head | rpm | highest speed6000rpm,reduction ratio1.5:1 or 1:1 (ZF speed reducer can be added,reduction ratio 1:1 ; 4:1) | |||
XYZ-axis ball-screw size | mm | 8016x6316x5010 | |||
X-axis rail size | mm | heavy duty roller liner guide 55 | |||
Y-axis rail size | mm | heavy duty roller liner guide 55 | |||
Z-axis rail size | mm | rectangle slide rail | |||
X/Y/Z axis rapid feed | m/min | 12x20x20 | |||
three axis working rapid speed | mm/min | 1-8000 | |||
positioning accuracy | mm | ±0.02 | |||
repeat positioning accuracy | mm | ±0.005 | |||
control system | / | MITSUBISHI/FANUC/SIEMENS | |||
spindle motor | kw | 30 | |||
X-axis servo-actuator | nm | 70 | |||
Y-axis servo-actuator | nm | 40 | |||
Z-axis servo-actuator | nm | 40 | |||
pneumatic source requirement | Kg/Cm2 | 6 | |||
table load capacity | kgs | 12000 | |||
power requests | kva | 50 | |||
weight(approx) | kgs | 49 | |||
|
|
|
|
|
|
|
|
|
|
|
|
Standard accessaries | Special accessaries | ||||
1,full closed guard(without top cover) | 1, deep honing Coolant thru tool holder device | ||||
2,column postposition carrier | 2,CNC rotatry table | ||||
3,Double oil hydraulic cylinder balance system | 3,Electrical box air-conditioning device | ||||
4,Oil-water separator | 4,Optical Scale ffedback system | ||||
5,Cutting fluid cooling system | 5,High pressure coolant thru spindle | ||||
6,Double spirals type chip conveyer | 6,Cutting fluid automatic system | ||||
7,Crawler type chip removal/ debris collector car | 7,Automatic tool length measurement systems | ||||
8,Working light and daylight lamp | 8,Automatic work-piece measurement systems | ||||
9,Program end alarm light | 9,oil-pressure clamping auto 90°lateral milling head | ||||
10,water cannons and air gun for cleaning | 10,oil-pressure clamping maunal 90°lateral milling head | ||||
11,Rigid tapping | 11,lengthening milling head | ||||
12,RS232C port | 12,gear type milling head | ||||
13,Portable hand wheel | 13,milling head with five faces | ||||
14,Spindle cooling system | 14,Erect milling head | ||||
15,Electrical box heat exchanger | 15,manual Universal milling head | ||||
16,foundation pad and balance adjustment pad | 16,straight transfer milling head | ||||
17,One set of tool and adjustment box | 17,ZF speed reducer+straight transfer milling head | ||||
18,Operation and maintenance instructions |
|
||||
19,automatic power turn-off device |
|
||||
20,precision check report |
|
||||
21,System Operation and maintenance instructions |
|
||||
22,Outside varying voltage(220/380V) |
|
||||
23,Manual/program spindle debris device |
|
||||
24,Central lubricating system |
|
Send your inquiry to this supplier