1 / 1
Model No. : | CLW9401GYY |
---|---|
Brand Name : | clw |
Product description
Tank dimension (L*W*H) (mm) | 13000*2496*1996(all the dimension can be modified if you specified ) |
Trailer dimension (L*W*H) (mm) | 13500*2500*3850 |
Trailer weight (ton) | 10 |
A. running gear |
|
| JOST 2”, bolted type
|
2. Landing leg | JOST A400
|
3. Suspension | Leaf spring suspension / Air suspension with front axle lift(BPW or Watson Chalin) BPW 12tons axles/ FUWA 11.5tons axles Or BPW 13 tons axles /FUWA 13 tons axles Or BPW 16 tons axles /FUWA 16 tons axles |
4. Axles | Same as upward |
5. wheel rims | 8..25-22.5.,13units Aluminum magnesium alloy |
6. tires | 295/80R22.5 13units |
7. brake system | Dual line pneumatic brake system. ISO type air coupling at front of the semi-trailer. Double acting chamber brake for axle.
|
8. electrical system | 24-volt electrical system to be compatible with the tractor unit electrical system. 7 pole plug placed at front in accordance to ISO, norms NO.1185. |
9. lights | Harness: oil and vapor proof cable All lamps are LED, Front: clearance lamp 4pcs Side: mark lamp 4pcs/side Turning lamp 4pcs/side Rear lamp: Reverse lamp R-L 2pcs Turning lamp R-L 2pcs Brake lamp R-L 4pcs Rear dished (high mark): Turning lamp R-L 2pcs Brake lamp R-L 2pcs Rear top: clearance lamp 2pcs |
B.TANK BARREL | |
1 Tank Material | Carbon / stainless steel /aluminum alloy |
a) TOP | 5mm nominal. |
b)Sides | 5mm nominal. |
c)Bottom | 5mm nominal. |
2.Tank profile | Ellipse |
Test pressure | 0.035Mpa |
3.Capacity | 55 cbm(including vapor volume). |
4.Compartments |
|
5.Bulkhead | 6mm,dished and flanged. 6mm, |
6.Baffle | 5mm,dished and flanged. 5mm, |
7.Walkway | Anti-skid walkway along the entire length of the tank. Aluminum alloy material. |
C.TANK ACCESSORIES AND FITTINGS | |
| 20’’manhole with breathe valve |
Product indicators |
|
Discharge System | gravity discharge system. |
4.1 Foot Valve |
|
Discharge faucet |
|
4.3 Piping | One 4” discharge pipe per compartment. Material is carbon steel. Piping to be hydro-statically tested. The piping slope toward front at angle of minimum 1.5°. |
4 Gasket | material:BUNA N |
Control System | Pneumatic type control system . pneumatic control block. Place in control box at right side. System includes: 1) 1 set switches for foot valve control. |
5 Vapor Recovery System |
|
6 Overfill prevention |
|
7 Capacity indicators |
|
8 Ground Cable | An antistatic strip and reel |
D.ACCESSORY | |
1.Traffic cone | Nil. |
2.Wheel chocks | 2Pcs.tire move protection rubber. |
3.Spare tire carrier | Nil. |
4.Toolbox | 1Pcs.carbon steel material. |
5.Hose carrier | hose carrier 2Pcs, L-side 1Pcs and R-side 1 Pcs , 4.3m. |
6.Hose | One 3”x4m hose |
7.Extinguisher | 8kg BC extinguisher,2 Pcs. |
9. Drains hose | Water drains hose at rear of tank |
10.Ladder | One ladder st the front. |
| side guard R-L. |
| rear bumper |
Mudguard |
|
| Nil. |
No. | Parts | Specification/model | Qty. | Remark/Brand |
1. | Manhole cover | 20” SW111110 | 3 | FMC /CIVACON |
2. | Foot valve | 4” | 3 | FMC/OPW |
3. | Discharge Coupling | 2” | 1 | Made in China |
4. | Air control switch group | 3 COMPT | 1 SET | FMC/OPW |
5. | Discharging hose | 3”x4m | 1 | Made in China |
6. | Gravity drop adapter | 4”FAJ-102 | 3 | Made in China |
Send your inquiry to this supplier