China Supplier Single Crystal Diamond Dies/ Single Crystal Diamond Dies
Introduce of Single Crystal Diamond Dies : The wire drawing die/mould is a kind of mould that can get the shape and size required for the cross-sectional area to reduce the cross-sectional area of metal by pulling metal through the mould under the external forces in metal working process. The wire drawing die/mould is used widely, for example, high precision wire materials used in electron device, radar, television, instrument and aerospace etc., and common tungsten wire, molybdenum wire, stainless steel wire, electric wire and cable, and various alloy wire . Because of the raw material of wire drawing die/mould adopted the natural diamond or synthetic diamonds, it has good wear resistance with long service life. The principle of Single Crystal Diamond Dies : Thick wire inlet: various metal wire; Die/mould shell: stainless steel material under the general conditions; Sinter setting: special metal power sintering structure; Various diamond: natural diamond, man-made synthetic diamond, man-made crystal diamond etc..
Advantages of Single Crystal Diamond Dies : The surface smoothness is best, and the tension of die/mould and friction force are minimum in the die/mould materials. It is recommended to make the finished products die(outlet die), microfilament die and the die required special brightness the surface of wire. Applications of Single Crystal Diamond Dies : This product is suitable for various high quality gold wire, fine tungsten molybdenum wire, electromagnetic wire, copper-clad aluminum wire, silver wire, supper line aluminum wire and other valuable products etc.. Pictures of Single Crystal Diamond Dies :
Technical parameter of Single Crystal Diamond Dies :
hole diameter(mm) | tolerance(μm) | Die sleeve |
A | B |
φ0.020~0.070 | 0.5 | 25 | 5 |
φ0.071~0.200 | 1 | 25 | 8 |
φ0.201~0.400 | 1 | 25 | 8 |
Φ0.401~0.600 | 1 | 25 | 10 |
Φ0.601~1.000 | 2 | 25 | 10 |
more than 1.000 | 3 | 30 | 15 |
|
Name Wire materials | Flexile wire | Hard wire |
Inlet area | 70°+/-20° | 60°+/-20° |
Lubrication area | 35°+/-20° | 30°+/-5° |
Compression area | 16°+/-2° | 14°+/-2° |
Sizing area | 20-50 | 40-80 |
Safety angle | 15°+/-5° | 15°+/-5° |
Outlet area | 50°+/-20° | 50+/-20° |
Customers' feedback for Single Crystal Diamond Dies :