Item | FU9000-E series |
Control Method | SPWM |
Input Power Supply | 400V Power Supply: 340VAC~460VAC 220V Power Supply: 180VAC~250VAC |
Frequency Control | Frequency Range | 0.1~400.00Hz |
Frequency Accuracy | Digital:0.01%(-10~40°C) Analog:0.1%(25±10°C) |
Frequency Setting Resolution | Digital:0.01Hz Analog:1% of Max Operating Frequency |
Output Resolution | 0.01Hz |
Operator Setting Method | Press← or ∧ or ∨ to set |
Analog Setting Method | 0-5V /0-10V 4-20 mA /0-20mA |
Other functions | Frequency up/lower limit,start frequency,stopping frequency,three skip frequencies can be individually set |
General Control | Acceleration/Deceleration time | 0.1-6500s four selectable combinations of independent acceleration and deceleration setting. |
V/F Curve | Set V/F curve at will |
Torque Control | Max Torque 10.0% Max output voltage,the starting torque can reach 150% at 1.0Hz |
Multi-function input terminals | 6 multifunction input terminals for 8 multi-speed,easy PLC,4 Accel/Decel time,UP/DOWN command,external emergency stop |
ITEM | HCI-A |
Communication control | RS485 |
Operating temperature | -10~40°C |
Humidity | 0~95% relative humidity |
Vibration | 0.5G or lower |
Protection Function | Instantaneous over current | Approx.200% 1 minute |
Over load | Inverter:150% 1 minute |
Motor Overload protection | Electronic thermal overload relay |
Over voltage | 23 series:DC bus over 400 Vdc 43 series:DC bus over 800Vdc |
Under voltage | 23 series:DC bus voltage drop 200Vdc 43 series:DC bus voltage drop 400Vdc |
Momentary power loss | 0~2 seconds:The inverter can be restarted by speed search. |
Heat sink over heat | Protected by thermistor |