Carbon Block  Filter Cartridge 0.1 Micron
Carbon Block  Filter Cartridge 0.1 Micron
Carbon Block  Filter Cartridge 0.1 Micron

1 / 1

Carbon Block Filter Cartridge 0.1 Micron

Get Latest Price
Send Inquiry
Model No. : RSWD2510
Brand Name : spring water
6yrs

Zhenjiang, Jiangsu, China

Visit The Store
  • Platform Certification

Product description

This Spring water MG-10MCB Microguard carbon block and polyethersulfone (PES) filter cartridge reduces bacteria, protozoan cysts, chlorine taste and odor, and sediment in residential and commercial drinking water. It has an absolute filtration rating of 0.15 micron for 99.9999% reduction of bacteria and cysts. The cartridge is made of a carbon block pre-filter and a PES membrane mounted on polystyrene and surrounded by polyolefin netting. The pre-filtering provides extended life for the membrane by reducing chlorine and fine sediment. Two O-rings on the end cap ensure absolute sealing against Spring water 3G, Slim Line, and Standard filter housings (sold separately). The cartridge has an initial pressure drop of 11 pounds per square inch (psi) at a recommended flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 140 degrees F (4.4 to 60 degrees C). This filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 53 and United States Environmental Protection Agency (USEPA) Guide Standard and Protocol for Water Purifiers (1987) for quality assurance, and is for use in various applications, including drinking water purification, laboratory water treatment, and film processing, among others.



Product features:

Reduces bacteria, protozoan cysts, chlorine, and fine sediment in residential and commercial drinking water

Absolute filtration rating of 0.15 micron for 99.9999% reduction of bacteria and cysts

Carbon block pre-filter and PES membrane mounted on polystyrene for extended life

Initial pressure drop of 11 psi at a flow rate of 1 gpm

Operating temperature range of 40 to 140 degrees F (4.4 to 60 degrees C)


Specifications

Absolute filtration rating

0.15 micron

Estimated capacity

200 to 600 gallons

Initial pressure drop at 1 gpm

11 psi

Recommended maximum pressure differential

88 psi

Operating temperature range

40 to 180 degrees F (4.4 to 82.2 degrees C)

Microbial treatment effectiveness

US EPA Guide Standard and Protocol for Testing Microbiological Water Purifiers (1987)

Materials certification

NSF/ANSI standard 42

Maximum dimensions (H x W)

10.283 x 2.875 inches (261.18 x 73 mm)



The absolute filtration rating is for a particle removal efficiency of 99.9999%. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

China Spring water manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.


Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628