1 / 6
Model No. : | car paint protection film |
---|---|
Brand Name : | L.Z.B |
Product description
Item NO. | car paint protection film |
Name | Transparent car paint protective film |
Thickness | 0.14mm or 0.2mm |
Material | PVC |
Size | 1.52*17m |
Protective film | 0.05mm PE |
Release film | 0.05mm PET |
Glue | Removable glue |
Function | Paint protection |
Resistance | Starch, poke, water, dirt, grease, salt, weak acid oil |
Durability period | Over 3 years |
Compatibility | Die cutting, car decoration |
Used | Car body |
Colors available | Transparent and transparent with glitter |
1. | Have a clean dust free environment. You cannot install this film in an area that is not spotless. |
2. | Gather together all of your supplies. This includes the roll of film or kit, knife, squeegee and application solution |
3. | Now measure and cut out the film to fit your car. This step can be difficult because it must be precise. If you’re not sure if you can cut the film to the right measurements, then it’s recommend that you buy the custom designed kits. In these, the film is already pre-cut to fit certain models. |
4. | Now that everything is ready, you need to prepare the vehicle. It must be completely spotless because any dirt and dust left on the car will be trapped under the film. |
5. | Use the application solution to wet the area thoroughly. Remove the backing from the film and gently place it in position without applying any pressure. Once it’s in place, take the squeegee and smooth out the water and air bubbles. Begin in the center and work your way outward for the best results. |
6. | Once the film is in place and all the bubbles have been squeezed out, use the knife to trim off any excess film. |
Send your inquiry to this supplier