Product description
Specifications 1.good flexible
2.anti-tear and aging resistance
3.non-toxic
4.environmentally
Two component polyurethane adhesive for air filter, the component ratio is 100:25 Machine adhesive Physical nature: Color: part-A: orange-red (color as your request) Part-B: brown-yellow Physical form: viscous liquid (sticky liquid) Viscosity: part-A: 800-1000MPa.s (25°C) Part-B: 25-50MPa.s (25°C) Density: part-A 1.02g/ml Part-B 1.27g/ml Instructions: 1. Material-A should be stirred or shaked well when you injected it into the machine. 2. Material-A and material-B are mixed at the mixture ratio 100:25 3. The material’s work temperature should be controlled 24°C-28°C then you can start operation 4. Brushing the mould with release agent before using the mould (notice: the new plastic mould can be wiped free) 5. If the response is inadequate, please measure the ratio 6. Material-A and material-B must be sealed to store. Or they can react with air or water, affect using effects. Notes: 1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects. 2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature. 3. EXP: 6 months 4. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.
Features | Part-A | Part-B |
Ingredients | Polyether polyols | MDI |
Color | As your request | Brown-yellow |
Viscosity (25°C) | 800-1000MPa.s | 25-50MPa.s |
Density | 1.02g/ml | 1.27g/ml |
Physical form | Viscous liquid (sticky liquid) |
EXP | 6 months |
Application | Injection automobile air filter end cover |
Package | Export standard seaworthy packing |
Hardness | Shore A |
notes | 1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects. |
2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature. |
3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive. |
If you are interested in our product,pls. feel free to contact me.