Calcined Magnesite Rotary Kiln with Low Price

Specifications Rotary Kiln

1. Long service life

2. Higher productivity

3. Cost saving

4. CE and ISO9001:2008

Characteristics The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. The fuel for this may be gas, oil or pulverized coal.     Scope of product Factory Weldment: The process technics of connecting the two machined workpieces atoms by use of either or both of heating,pressure. Technical Exchange:Effective exchange at the machining site with presence of relevant technicians and workers improves the workpieces machining coordination, and utility and safety as well.
Metal workpieces Machining:Machining metal workpieces to meet relevant process requirements by use of the lathes.Rolling: Rolling machine rolls metal workpieces constantly to reach the required radians.Ground Level Lathe: Machining Mainly the workpieces with the diameter between 800mm and 4000mm,and length within 13m,such as ring plates,flanges,shell covers, valves etc.
Sand Blasting:Clean and de-rust the large workpieces surface and integrate outer surface,which strengthens adhesion between the outer workpiece surface and coating.
LAB 1: Chemical ores tests and Analyzing Report Room
LAB 2:Ores Measuring and Analyzing Operation Room
Radiography Room:Using flaw detector to detect if there is any crack or other defects inside steel plates or other workpieces.
Oxygen Cutting Equipment: Using oxygen cutting to shape the steel workpieces into the suitable one and size. Comprehensive