1 / 1
Model No. : | BN-680S |
---|---|
Brand Name : | BUEN |
Type : | Preform Injection |
Product description
• Robotic pincher interface. All-digital control system uses dedicated controller,multiple CPU processing division,a multi-functional automatic fault detection,alarm system,certificates 99 mold of processing procedures,with remote control interface.
Servo motor injection molding machine
Clamping system:
-We adopt five fulctum hyperbolic elbow clamping mechnical which can tansfer power effectively and ensure the prcess of high speed response
-Low pressure mold protection system
-Tie bar adopts surface hard chromium plating processing
-Mould platen bottom support use copper material which can protect steel belt
-Automatic centerial lubricarion system which is easy for after service
Injection system:
-Optimization design of the injection unit to provide higher accuracy,ensure the higher stability
-Injection parts adopt double guide tie bars which improve inject technology
-Injection,holding pressure closed-loop control and precision back pressure control
-Cylinder temperature time monitoring to ensure high quality molding requirements.
Electric system:
-The advanced injection plastic machine computer work stable and accurate
-Intelligent method of defects in the course of injection process parameters
-It can save more than one hundred program
-It is equipped with mechanical arm eletrical interface which can be used to match the special mechanical arms for the injection robot.
Hydraulic system:
-Dual proportion load induction oil circuit is used to get steady operation,energy consumption variable with load and energy saving
-The oil box volume is large and the cooling system is arranged properly, it can reduc the oil efficiently
-High function oil pump,liquid motor, seal element can snsure low noise and zero penetration.
-All adopt international well-know hydraulic components
Technical parameters:
BN-680S | ||||
INJECTION PART PARTE INYECCIÓN |
UNIT | A | B | C |
Screw diameter Diámetro del tornillo |
mm | 90 | 95 | 100 |
Screw L/D ratio Tasa L/D del tornillo |
L/D | 20.4 | 19.4 | 18.4 |
Shot volume Volumen de Inyección |
cm3 | 2543 | 2834 | 3140 |
Injection weight(PS) Peso de la inyección |
g | 2314 | 2579 | 2857 |
oz | 81.6 | 90.9 | 100.8 | |
Injection rate Tasa de inyección |
cm3/ s | 522.6 | 582.3 | 645.2 |
Injection pressure Presión de inyección |
Mpa | 183.7 | 164.9 | 148.8 |
Screw speed Velocidad del tornillo |
rpm | 140 | ||
CLAMPING PART PARTE DE CIERRE |
||||
Clamping force Fuerza de cierre |
kN | 6800 | ||
Opening stroke Apertura |
mm | 900 | ||
Space between tie bars Espacio entre barras |
mm | 925x875 | ||
Mould thickness Espesor de molde |
mm | 330~900 | ||
Ejector stroke Carrera del expulsor |
mm | 335 | ||
Ejector force Fuerza del expulsor |
kN | 150 | ||
OTHERS Otros |
||||
Oil pump pressure Presión de la bomba de aceite |
Mpa | 16 | ||
Oil pump motor power Potencia del motor de la bomba de aceite |
kW | 29+39.4 | ||
Heater power Potencia del calefactor |
kW | 42 | ||
Machine dimension Dimensión de la máquina |
m | 9x2.1x2.6 | ||
Oil tank capacity Capacidad del tanque de aceite |
L | 1020 | ||
Machine Weight Peso de la máquina |
t | 28 |
Processing photos:
Welcome for your inquiry.
Send your inquiry to this supplier