Black / Blue Industrial Cooling Tower Filling Replacement , Hh Type

 

Black / Blue Industrial Cooling Tower Filling Replacement , HH Type

 

 

Quick Detail:

 

HH TYPE Fills feature vertical flow channels with large openings that produce the higher water velocities necessary to create an anti-fouling environment in the fill.

 

 

Description:

 

· The filling has larger specific surface-area after several technological improvement, this prolongs detention time of drip on filling surface, make heat interchange of water and air more adequate, it is proved by testing that: Comparing to fillings which are applied widely in the market, on the precondition of comparative thermal performance, the airflow resistance of this kind of filling diminishes 8~20%

· It has the good characteristic of hydrophilicity, proof-oil, high-temperature-resistant, it doesn’t occur geometric alteration under condition of 65°C, and it won't crash and crack under condition of -40°C. Its anti-flaming oxygen index is more than 40.

· According to practically experience of similary project, the filling is bound by special adhesive, ratio of bonding is no less than 95%, intensity of flat crushing ≥3000 N/m2, shear intensity after being bound for 24 hours is more than 3.3Mpa.

· It has the good characteristic of hydrophilicity, proof-oil, high-temperature- resistant, anti-ageing. The strength of filling block is more than 300Kg/m2.

 

 

Applications:

 

COOLING TOWER

 

 

Specifications:

 

Sheet spacing:20mm

Thickness after forming:10mils

Sheet size: 500mm×2400mm/ 500mm×2000mm/ 500mm×1200mm/ 500mm×1000mm

 

 

Competitive Advantage:

 

1.Good Chemical and Physical Performance

2.Good anti-flaming performance

3.High strength of assembly

4.Anti-fouling vertical flow design plus engineered microstructure for high water velocity and improved water distribution and thermal mixing
5.Material meets Cooling Tower Institute (CTI) Standard 136