Biomass Generator 500kw

Specifications Biomass Generator 500kw

1)Gas Engine ,Leroy Somer

2)Low Gas Consumption

3)1500 Hours Warranty

4)CE Approved

                    Biomass Generator 500kw          

Gas genset data
Genset model	GNPG500
Prime power/Continuous power (kW/KVA)	500/625
Output Voltage (V)	400V, 3 Phases 4 Lines
Power factor	0.8 lagging
Frequency (Hz)	50
Rated speed (RPM)	1500
Open type Genset Overall Dimension (mm)	4250x1700x2185
Soundproof type Genset Dimension (mm)	5165x2300x2800
Net weight without canopy(kg)	6080
Gas Engine Data
Type		4 stroke, water-cooling, wet cylinder liner,  electronic-control ignition system, pre-mixed perfect mixed burning
Cylinders& Arrangement		12V
BoreXStroke(mm)		159X159
Displacement(L)		37.8
Compression ratio		11.5:1
Aspiration		Natural
Cooling Method		Radiator fan water cooling
Governor type(speed regulating type)		Electronic governing
Starting method		Electric, 24 V motor
The lowest gas consumption(m3/kw.h)		0.3
Idling speed(r/min)		700
Oil recommended		SAE 15W-40 CF4 or above
Oil consumption		≤1.0g/kW.h
Alternator Data
Brand			Leroy Somer
Model			LSA49.1 S4A
Rated power			500KW/ 3 phase
Rated Voltage (V):			380~480 (±0.5%)(AC)
Type			3 phase/4 wire, brushless, automatic voltage  regulator, drip proof, protected type.
Frequency (Hz)			50
Efficiency:			91.8%
Voltage regulation			± 0.5 %(adjustable)
Insulation class:			Class H
Protection class:			IP 23
cooling method:			wind-cooling, self-heat-rejection
Voltage regulating mode			Automatic voltage regulator
Compliant with international standards:			IEC 60034-1, NEMA MG1.22, ISO 8528/3, CSA, UL 1446,  UL 1004B on request, marine regulations, etc.

   Digital Control panel Controller Brand: Smartgen, Deepsea,ComAp Control Panel: English interface,LED screen and touch buttons. Main Functions: 1- Display loading power, voltage, currenct, frequency, speed, temperature, oil pressure, running time etc. 2- Warning when low or high voltage, low or high frequency, over current, over or low speed, low or over battery voltage etc. 3- Over load protection, over/under frequency protection, over/under/imbalance voltage protection, and low oil shutdown       Standard Scope of Supply   1. Brand new Gas engine .   2. Brand new Stamford  AC brushless alternator IP23   3. Smartgen Control Panel.   4. Ignition system,including: ECU, Spark plug, High-voltage electricity wire;Ignition switch,Ignition coil;Wires.   5. Electronic speed regulator,including controller and actuator.   6. Solenoid valve   7. Flame arrester.   8. Hand valve   9. Zero pressure valves   10. Mixer.   11. Air filter.   12. Silencer   13. Remote radiator   14. Air circuit breaker (For the protecting purpose of overload, over current, etc)   15. Rubber anti-vibration pad between engine, alternator, control panel and base frame   16.Standard accessories, anti-vibration pad, exhaust pipe, maintenance tools kit, filters   17. Maintenance Operating manual, Quality certificate, Gen-sets ex-factory test report