best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car
best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car
best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car
best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car
best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car

1 / 3

best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car

Get Latest Price
Send Inquiry
Model No. : A400
Brand Name : Dingtek

Product description

best price vehicle GPS/GPRS tracker/locator/ GPS tracker for car Product Description Standard GPS/GPRS car/trauck/bus tracker. It's can apply any vehicle. Real time monitoring, you can know your love car where it is any time, and anti theft. this car tracker is available to historic tracking, oil cut, SMS configuration and etc   Overview The GPS Tracker A400 can connect with 3 RS232 device, such as phone handle, TTS, Camera, level sensor, temperature sensor and etc. Also, it can work with cement drum sensor to realize cement drum rotation detection.  Furthermore, it can stop fuel pump or starter to stop the vehicle. Of course, you should connect the tracker into the fuel pump line or starter line with relay while installation.  The tracker can real time monitoring and query historic data by our platform.  Specification

Dimension

145*95*36mm

GPS

UBlox

Weight

600g

GSM/GPRS

EM310

Current

120MA@12VDC

Voltage

9-32VDC

Backup Battery

Yes, 2 hours

ACC Detection

Yes

SOS

Yes

Fuel pump stop/starter stop

Yes

RS232

3, for phone handle, camera , level sensor, TTS or LCD, temperature sensor

Working temperature

-20~+70


System Diagram Interface Definition 1. Pin Definition Main I/O port Pin 1: Thick Red, VCC (9-36VDC) Pin 2: Thin Black, ACC Pin 3: Black Green, Self-defined High level trigger input. Pin 4: Brown Green, Self-defined Low level trigger input I. Pin 5: While, Self-defined Low level trigger input II. Pin 6: Thick Black, GND Pin 7: Orange, SoS button. Pin 8: Purple, Oil cut.  Pin 9/10: Reserved. Main I/O port directly connect with the phone handle or dispatch panel. RS232 port Pin 1: RX 232 Pin 2: TX 232 Pin 3: GND Pin 4: 5V output.  2. Connection with F300 Level Sensor F300 wire: Red wire--------VCC Black wire------GND-----A400 Pin3 of the 4 pin connector GND Yellow wire RS232 TXD-------A400 Pin1 of the 4 pin RS232 connector RS232 RX Green wire RS232 RXD-------A400 Pin2 of the 4 pin RS232 connector RS232 TX 3. Connection with F330 Level Sensor F330 wire: Red wire--------VCC Black wire------GND-----A400 Pin3 of the 4 pin connector GND Yellow wire RS232 TXD-------A400 Pin1 of the 4 pin RS232 connector RS232 RX Blue wire RS232 RXD-------A400 Pin2 of the 4 pin RS232 connector RS232 TX 4. Connection with F500 Level Sensor F500 wire: Red wire--------VCC Black wire------GND-----A400 Pin3 of the 4 pin RS232 connector GND Yellow wire RS232 TXD-------A400 Pin1 of the 4 RS232 pin connector RS232 RX Blue wire RS232 RXD-------A400 Pin2 of the 4 pin RS232 connector RS232 TX 5. Connection with F550 Level Sensor F550 wire: Red wire--------VCC Black wire------GND-----A400 Pin3 of the 4 pin RS232 connector GND Blue wire RS232 TXD-------A400 Pin1 of the 4 pin RS232 connector RS232 RX Yellow wire RS232 RXD-------A400 Pin2 of the 4 pin RS232 connector RS232 TX 6. Connection with Fuel Pump/Starter Relay wire: Red wire--------VCC Black wire------GND---------------A300 purple wire pin8 in the 10pin connectors . Green wire insert into the fuel pump line, one end to power, one end to fuel pump. Notes: 12v relay only for car. 24v relay only for truck. 7. Connection with Camera  If user connect the camera from us with our A400 tracker, just connect the 4 pin connectors together. Installation part list

NO.

Item

Quantity

Remark

1

GPS Tracker Body

1

 Silver

2

GPS Tracker SIM Card Cover

1

  Usually already screwed with the body

3

Screw

4

 Usually already screwed with the body

4

Power Cable

1

3 pin

5

GPS Antenna

1

 

6

GSM/GPRS Antenna

1

 

7

Double side stick

1

 

8 *

Relay

1

Optional

9*

4 pin connector

1

Optional for RS232 connection

 Installation steps Before installation, please check the part list. Make sure that you already have the total package of our tracker and one sim card which is enabled with GPRS data and sms. Notes:The sms function is used to debug while tracker failed to be online, such as set the apn/user name/password.   1. Find Position to Install  Before installation, please check the vehicle to find the appropriate position to install the gps tracker body.  Usually the tracker should be install under the dashboard which is hide to the driver or passenger. But make sure that the gps antenna should not be masked by metal and the side with label is facing to ground, otherwise gps will not be fixed.  The fuse box is one option for power to the gps tracker. But make sure that the inserting of gps tracker does not change the behavior of the fuse box.  Please make sure the gps tracker power supply do not interfere with the security and safety system.  2. Insert SIM Card Before insert or remove sim card, please make sure power off 1. Open the cover. 2. Unlock sim card slot. 3. Insert sim card. (The SIM card should be enabled with GSM/GPRS business.) 4. Lock sim card slot. 5. Restore the cover. Notes: please make sure that the tracker is enabled with gprs data and sms function. 3. Wire Connection Connect GPS antenna. Connect GSM antenna. Connect power line with GPS tracker. Connect power line with battery or other power supply (12V or 24VDC).  Red wire: pin 1, +VCC (12/24VDC) Black Thick wire: pin 6, GND Black Thin wire: pin 2, vehicle ACC line.  (for test purpose or vehicle which is not easy to connect with ACC, please connect white wire to +VCC) 4. Check LED Status  After power on, please wait for about 1 mintue later, then watch the led status. If red led slow flash, please send sms message to set ip, port ,apn. If yellow led slow flash, please put gps antenna to opensky. If any led always on or off, please power off and check sim card and antenna. If still same problem, please contact us for maintainance.

LED

Function

Status

always off

always on

slow flash (1s on, 3s off)

quick flash (1s on, 1s off)

Red

GSM/GPRS

Failure

Failure

GSM ok, GPRS fail

GSM ok, GPRS ok

Yellow

GPS

Failure

Failure

GPS not fixed

GPS fixed

5. SMS Configuration Only if red led slow flash, sms configuration can be helpful. Please make sure sim card is enabled with sms and gprs business. Below format is the standard SMS to configure server, port, apn, tracker id and etc. <SPBSJ*P:BSJGPS*T:174.142.053.069,6690*U:174.142.053.069,6688*N:14999640937*A:apnname, apnuser, apnpassword> < and > is included in the sms. Please make sure it is in the input mode of english. No space in the SMS. Ø T for TCP, U for UDP.174.142.053.059 is the server ip, , 6690/6688 is the port. If not 3 digital in the ip, please add 0 or 00 to make it 3 digital.e.g. 53->053. 9->009. Ø 14999640937 is the tracker id in 11 number. Ø A for user sim card apn info. In some country, GPRS need apn, user, name to login.  Ø In some country, only apn is ok. In such case, no need to input apn user, apnpassword. "," after apn name also no need to input. Ø After about 1 mintues of sending sms, the sender will get reply. If ok, the new setting will reply. Otherwise, error reply. The tracker replied as below: <BSJ*T:xxx.xxx.xxx.xxx,pppp*U:yyy.yyy.yyy.yyy,uuuu*A:apn*N:13412345678*GP:V*CGREG:S*CSQ:B*AO:T1*AF:T2*CS:H*TH:00*GPS:N*ER:%> We use * to divide each part, use <> to stands for the head and the tail
BSJ: stands for the fixed format head T:TCP IP and port U:UDP IP and port A: stands for the APN parameter, such as CMNET N: stands for the terminal No.  such as 13800000000 GP: stands for whether online, V=OK stands for online,V=NO stands for offline CGREG:stands for GPRS register status, S=1 or 5  stands for registered CSQ:stands for the signal intensity  B=0~31(31 the strongest signal) or 99( n signal) AO: stands for fixed time upload position data’s time interval when ACC open, T1=3-65535 unit: second AF: stands for fixed time upload position data’s time interval when ACC close,  T2=1-255  unit: minute CS: stands for over-speed threshold  H=0-255  Unit: km/h TH: stands for call limit GPS: stands for receiving satellite numbers  N=0-16   ER: stands for the last error code of the car terminal 6. Wire Routing and Restore After installation, please restore the vehicle cover, use stick to fix the gps tracker with vehicle. And make sure that the gps antenna side with label is facing to ground. And the gps antenna is not masked by metal. Plastic or glass does not matter. If you can monitor it on the tracker platform, then the installation is done. 7. GPS Platform Usually the user account and password is send to you while we send out the package. If not, please contact with our sales agent or engineer about this info.   8. Fuel Info Configuration If fuel level sensor is connected, the user should create the table between the fuel level and analog of tracker get, such as 0v--0liter, 1v---20 liter, 3v-50 liter.  Then input into the gps platform, after that the platform will show the fuel info. Features Real time monitoring; Historic tracking; ACC status detection; Oil cut / power cut; SOS alarm; Overspeed / Battery Cut / Fence alarm; High Level Trigger Input / Low Level Trigger Input; PC / Android Phone monitoring; match/work with fuel level sensor to monitoring fuel level consumption You can connect more than one RS232 level sensor Our Services Warranty Limited One Year Warranty   We warrants this quality product to be free of defects in material and workmanship for a period of one year from the date of purchase. During the period, we will repair or replace the product at no charge for parts or labor. But the shipment fee will be shared by the buyer (one party 50%).   TIME PERIOD OF THIS WARRANTY The time period of this warranty starts from the date of the original purchase and expires on the first anniversary date of purchase.   WHAT IS NOT COVERED BY THIS WARRANTY   No express or implied warranty is made for any defects in this product which result from accident, abuse, misuse, failure to operate the product in accordance with relevant instructions, neglect, immersion in or exposure to chemicals or liquids, extremes of climate, fungus, excessive wear and tear/cosmetic damage and defects resulting from other extraneous causes such as  unauthorised disassembly, repair or modification. This warranty shall not extend to any incidental or consequential damages arising from the purchase, use or inability to use this product even if Vivitar has been advised of such damages.  The laws of some countries and some States thereof do not allow the limitation of incidental or consequential damages, so the above limitation or exclusion may apply to you.
Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628