1 / 3
Model No. : | BCZ4×4 |
---|---|
Brand Name : | Buluoer |
Type : | CNC |
Jinan, Shandong, China
Product description
1. Best Multi Process Welder of circumferential circumferential seam or longitudinal seam of large diameter device.
2. Best Multi Process Welder with automatic flux recovery conveyor
3.Wireless control and roller rack equipment linkage, easy operation and accurate control.
The solar cell automatic Best Multi Process Welder (see the figure below) can automatically and continuously weld the front and back of the battery sheet according to the setting requirements to form a battery string. When welding, the welding tape is automatically fed, automatically cut off, and the battery string is automatically received after the welding is completed. The welding method includes infrared lamp welding method and high frequency electromagnetic induction welding method.
The automatic string welding machine and the fully automatic single-piece welding machine have the following advantages compared with manual welding:
1 The welding speed is fast, the quality consistency is good, the surface is beautiful, and there is no solder unevenness by hand soldering. Equipment Electric Welding Machine can avoid the influence of various human factors during manual welding, such as the influence of the operator's proficiency, the influence of physical condition, and the emotional shadow, so as to ensure the consistency and reliability of welding.
2 Electric Welding Machine reduce the number of operators and inspectors, reduce management difficulty and product costs. Nowadays, the labor cost has increased year by year. The annual recruitment is the most headache for the boss. The automatic welding machine can greatly reduce the number of employees.
The welding reliability of the 3 string welder is much greater than that of manual welding. Poor soldering is an important cause of premature component failure. Solar PV modules have a design life of 25 years, while components are usually installed outdoors, with a temperature change of around 30 °C per day, plus seasonal changes, and temperature changes. Since the solder ribbon substrate is pure copper, the coefficient of expansion of copper is about six times that of silicon (cell). This difference means that as long as there is a change in temperature, the solder joint and the cell are welded. As a result, poor soldering can result in reduced component power and, in severe cases, component failure. There are many reasons for poor soldering caused by manual soldering, such as soldering station temperature, flux coating, soldering iron temperature, personnel proficiency, etc. Some aspects can be solved through effective management, and in some cases, Fully controlled, the automatic stringer can be well solved for the factors affecting the welding reliability during the manual welding process. [3]
Type |
BCZ4×4 |
BCZ5×5 |
Effective Lift (mm) |
4000 |
5000 |
Effective retracting stroke(mm) |
4000 |
5000 |
Lift speed (mm/min) |
1000 |
|
Retracting speed (mm/min) |
120-1200 |
|
The max. loading of cross arm front end allowed (mm/min) |
120 |
|
Post revolving |
±180°Electric or manually |
Jinan, Shandong, China
Send your inquiry to this supplier