Ball Valve

Product Description
Technical Requirement:
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges.
Before connecting, body cap male thread should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water at pressure no less than 0.8MPA, no leakage.
Size: 1/2'' to 48''

Standard compliance:
1) Design and manufacture: API6D, API608, BS5351, ANSI B16.34
2) Test and inspection: API6D, API598
3) Face to face dimensions: ANSI B16.10
4) Flanged end: ANSI B16.5, B16.47 SERIES A & SERIES B
5) Butt-welding end: ANSI B16.25
6) Fire safe: API607, API6FA
7) Other standards (DIN, BS, JIS) is also available upon request.

Specifications:
1) Size: 1/2" to 48"
2) Class: 150LB to 2500LB
3) Type: Floating ball and trunnion mounted, full bore or reduced bore, soft seated or metal seated, top entry or side entry, one-piece/two-piece/three-piece, anti-blow out stem, antistatic design
4) Material: WCB, WCC, WC6, WC9, C5, C12, CF8, CF8M, CF3, CF3M, CN7M, LCB, LCC, LF2, A105, F304, F316, F304L, F316L, F11, F22, DUPLEX SS, MONEL, ALLOY 20, CAST IRON etc
5) Operation: Lever or gear operation
Cast Steel Flanged Floating Ball Valve


Features:

Two Pieces Cast Steel Body Ball Valve
Floating Ball, Full&Reduced Bore
Anti-static Device
Blow-out Proof Stem
Fire Safe Design
Low Emission
Cast steel and cast iron ball valves/Forged steel Ball Valves, Flanged ball valve, floating ball valve, trunnion mounted ball valve