1 / 1
Brand Name : | MECH |
---|
Product description
The Ball Check Valve main characteristics of the flow is large, the flow resistance pressure loss is small, good sealing performance, noise off, can reduce the water hammer wave. Horizontal or vertical installation. Micro resistance ball check valve can be used for cold water, hot water, industrial and domestic sewage pipe network, such as water pump outlet to prevent the media back.
Meide supply Ball Check Valve, size from 2"-12". The connection flange end is in according to EN 1092-2 and working pressure is PN10/16. Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for bothe interior and exterior surface which provide reliable corrosion resistance.
• Connection Ends: Flange to BS EN 1092-2:1997
• Working Pressure: PN10/16
• Temperature Range: 0℃- 100℃
• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550
MATERIAL SPECIFICATION
Part No. |
Part |
Standard Specification |
1 |
Body |
EN-GJS-450-10 |
2 |
Ball |
Aluminum ball +EPDM |
3 |
Cover |
EN-GJS-450-10 |
4 |
Bolt |
Carbon steel Zinc plated |
5 |
Nut |
Carbon steel Zinc plated |
6 |
flat Washer |
Carbon steel Zinc plated |
7 |
O Rings |
NBR |
8 |
Nut |
Brass HPb59-1 |
9 |
Washer |
EPDM |
10 |
O Rings |
NBR |
11 |
Nut |
Carbon steel Zinc plated |
12 |
Screw |
Brass HPb59-1 |
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Send your inquiry to this supplier