Automatic LP Gas Cylinder Welding Machine

Specifications welding valve seat

welding bottom base

welding tank girth seam

  Machine 1 valve seat welding   To complete the welding of valve seat ring joints. Ensure uniform forming, good appearance, weld penetration and weld width meets the technological requirements, the clamping is convenient. Using submerged arc welding technology, girth welding at one time   Feature Welding torch tilt, work piece rotation, welding angle adjustable The torch can be adjusted manually up and down, left and right, dip angle, in order to meet the welding requirements. The work piece rotation adopts AC inverter speed control, speed adjustable.   Parameters   Motor power: 0.55Kw Torch adjusting volume:     Up and down: 100mm     Dip angle: 25°~  60° Welding condition:     Welding voltage: 15 ~ 36 V; Stepless adjustable     Welding current: 50 ~500A; 60% utilization factor Grid voltage: 3-phase, 380 V±15% Work piece positioning diameter (mm): φ210-φ375 Valve seat diameter (mm): φ30-φ60 Valve seat height (mm): 15-45   Machine 2 tank body SAW girth welding   Complete cylinder girth automatic welding. To ensure concentricity, uniform forming, good appearance, weld penetration and weld width meet the technological requirements, the clamping is convenient. SAW welding process, complete in one time welding.       Feature       The welding torch is fixed; the work piece rotating, welding position is horizontal   The work piece rotation is driven by clamping, roller bearing bracket   The torch is adjustable along the longitudinal beam, adaptable to various welding   The torch can be adjusted up and down, left and right, dip angle, in order to meet the welding requirements.   The work piece rotation adopts AC inverter speed control, speed adjustable.       Parameters       Rotation speed: 200~600mm/min; adjustable   Motor power: 0.55Kw   Compressed air: 0.4~0.6MPa   Torch adjusting volume:       Up and down: 100mm       Dip angle: 25°~  60°   Welding condition:       Welding voltage: 15 ~ 36 V; Stepless adjustable       Welding current: 50 ~500A; Stepless adjustable 60% utilization factor       Welding wire diameter: Φ1.6~Φ2.4mm   Grid voltage: 3-phase, 380 V±15%   Welding torch pneumatic feed: 150mm       Machine 3 tank base CO2 gas shield welding   Complete cylinder base girth automatic welding. To ensure concentricity, uniform forming, good appearance, weld penetration and weld width meet the technological requirements, the clamping is convenient. CO2 gas shield welding process, complete in one time welding.       Feature       The welding torch is fixed; the work piece rotating, welding position is horizontal   The work piece rotation is driven by clamping, roller bearing bracket   The torch is adjustable along the longitudinal beam, adaptable to various welding   The work piece rotation adopts AC inverter speed control, speed adjustable.   The torch can be adjusted up and down, left and right, dip angle, in order to meet the welding requirements.       Parameters       Rotation speed: 200~600mm/min; adjustable   Motor power: 0.55Kw   Compressed air: 0.4~0.6MPa   Torch adjusting volume:       Up and down: 200mm       Dip angle: 25°~  60°   Welding condition:       Welding voltage: 15 ~ 36 V; Stepless adjustable       Welding current: 50 ~ 500A; Stepless adjustable  60% utilization factor       Welding wire diameter: Φ0.8~Φ1.2mm   Grid voltage: 3-phase, 380 V±15%   Welding torch pneumatic feed: 150mm