automatic juice bottle making machine

Specifications juice bottle making machine

1. fully automatic

2. PCL MISTUBISHI

3. capacity: 4000bph

4. easy change bottle mold

Automatic juice bottle making machine :   Machine introduction: SAZ-2L-4 automatic stretch blow molding machine with 4 cavities is specially designed to produce PET bottle or high heat resistance for hot filling package such as juice and tea. It adopts multiple blowing to reduce the residual stress, as result; shaped bottle has slight shrinkage during hot filling. In addition, crystallization varies with different mold design, as a result, the PET bottle produced can stand temperature over 90°C depending on the type of PET material with different crystallization rate. The neck up blowing mode protects the bottle preform from damage during blowing and ensures stable performance. With high strength, good transparency and low production costs, abundant material resource, SAZ-1.5L-4 plays a big role in hot filling package market.   Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise of air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation and maintenance, etc. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Low rejection rate: less than 0.3percent.   Machie Parameter:

Item		SAZ-2L-4
Bottle type specification	Cavity	4
	Real output	2500-4000
	Max.volume	2L
	Bottle mouth maximum diameter	28-38mm
	Bottle biggest diameter	100mm
	Bottle maximum height	330mm
Power specifications	Light tube quantity	32pcs
	Maximum heating power	40KW
	All electric machine installation	43KW
	Actual consumption	32KW
Air pressure specification	Work pressure	7-9kg/cm2
	Low-pressure gas consumption	1600L/min
	Blow bottle pressure	25-35kg/cm2
	Higher -pressure gas consumption	3500Ltr/min
Forzen water specification	Work pressure	5-6 kg/cm2
	Temperature range	10°C
	Consumption	5000kcal/hr
	Forzen water flow	50L/min
Machine specification	Size of the machine	4.5x1.6x1.9
	Weight of the machine	3.5 ton