Automatic Carbon steel pressure water filter

Automatic Carbon steel pressure water filter         Fiber bundle filter are used in average accuracy filtering to remove suspended matters in water because of big ratio surface area and gaprate and flexibility and corrosion resisting capabilities. It is widely used in living water supply,water injection in oil field, fine filtering in chemical liquor, demineralization and desalination of industry water and pretreatment of pure water, second-class treatment inlight industry and paper making industry.

Carbon steel pressure filter Working Principle
     Fiber bundle filter with its great surface area and porosity of suspended particles that touch the unifying role of tensile, adhesion of particles are suspended in water, the closure in the filter layer, because the filter was flexible, variable porosity in the filtration process , the filter bed cross-sectional and longitudinal uniformity of the porosity gradient to ensure a reasonable high-speed filtering and high-precision filters can be achieved simultaneously      During operation, water flow into the upper and flow out in bottom. Under the action of gravity,the self-service fiber density adjustment means pushing fiber filter bed running down the fiber filter layer is compressed, its bulk density gradually increased along the flow direction, so that the filter layer along the water flow porosity direction by large became smaller, the corresponding filter pore diameter and pore decreases, thereby forming a particularly desirable variable void deep filter status. Its filtration process has both horizontal and depth filtration,as well as vertical depth filtration, thus effectively improving the filtering accuracy.
     During backwash, clean water in the opposite direction through the fiber filter bed, in the backwash water and clean air role, self-service fiber density, fiber filter bed adjusting device driven by the upward movement of the fiber filter upward extension to reach a loose state, by mixing air and water cleaning technology, and everything in the bubble and water washing process, the fiber filter longitudinally in a constant state of jitter, thereby making fiber filter cleaned very thoroughly, so as to achieve the desired cleaning effection.   Actual picture in scene        Carbon steel pressure filter Characteristics
1. High efficiency of filtration: the filter filament diameter up to tens of microns to a few microns, with a huge surface area,its removal rate for SS was close to 100%.
    Suspended solids content of SS:20mg / L, the filtered effluent suspended solids less than 2mg / L;
    Particle size greater than 5μm suspended solids: removal rate is up to 90-95%.
    Also can remove Bacteria, viruses, organic molecules, colloids, iron and other impurities.   2.Stepless variable gap filter layer: automatic form the filter bed porosity,no need to allocate artifically.
3.Stable performance, long service life:
    Filaments after modification, the performance does not decay, with strong chemical stability, filter life is generally up to 5--10 years;
    Have sufficient chemical stability, no harmful ingredients elution, filtration, high performance polypropylene fiber filament light texture, strength,
    Good elasticity, wear resistance, corrosion resistance, non-absorbent. 4.Reasonable structure: floating slab without jamming: original guide, to ensure that the floating plate does not appear skewed jamming; automatic adjustment.
   The density of the entire filter layer: filter layer density automatically match process, without power; filter cleaning when fully discharged loose, and can be used to scrub the air of high intensity, clean thoroughly, filter layerdoes not harden.
5.Filter speed: 20-50m/h 6.Interception capacity: generally 5-15kg / m3 filter is 2-3 times that of conventional filters.
7.Small footprint: manufactured in the same amount of water, covering only the traditional filter of 1/3-1/8.
8.Tons of low cost: the system take the same amount of water, cost less than conventional filters.
9.Low water consumption: only 1-3% of the water cycle system, backwash generally available raw water.   Carbon steel pressure filter Application Swimming Pool
Artificial landscape
Drinking Water
Pretreatment for RO
Industrial Process Water Supply
Power Station Water Supply
Boiler Feed Water
Circulating Cooling System
Air Conditioning Cooling Water
Seawater Desalination Plant
Oilfield reinjection water
Gray water Reuse
Sewage Treatment
Wastewater Treatment    Technical Data-  Carbon steel pressure filter
1.Treatment effect
 1 Influent suspended solids: <50mg/L, the effluent suspended solids: <5mg/L;
 2 Water suspension: <20mg/L, effluent suspended solids: <2mg/L;
 3 Interception capacity:. 5-15Kg/m3 (filter).

2.Work environment parameters
. 1 Operating temperature: 5-60 ℃ (Special temperature can be customized);
. 2 Working pressure: ≤0.6MPa;
. 3 Water pressure: ≥0.04MPa;.
. 4 Backwash water pressure: ≥0.15 MPa;
. 5 Pressure drop:. ≤0.05MPa.

3. Operating parameters
. 1 Work: Pressure;
. 2 Run: flow from top to bottom;
. 3 Filtration speed: 25-35m/h;.
. 4 Run cycle: Depending on the turbidity of the water, depending on the minimum of not less than eight hours;
. 5 Backwash mode: combination of gas and water;
. 6 Backwash water: 1-3%;
. 7 Washing intensity: 4-15l/s·m2;
. 8 Air pressure: 0.05-0.1MPa (optional blower or oil-free compressor);
. 9 Air Strength: 40-60 L/m2·s;
. 10 Backwash duration: 20-50min (depending interception capacity).   Carbon steel pressure filter Models

Model	Vessel size φ×H(mm)	Water flow rate(m3/h)	Net Weight  (T)	Gross weight  (T)
PD863-400	φ400×2330	~3.7	0.31	0.45
PD863-600	φ600×2590	~8	0.52	1.07
PD863-800	φ800×3028	~15	1.11	2.10
PD863-1000	φ1000×3840	~20	1.52	3.56
PD863-1200	φ1200×4250	~30	1.81	4.06
PD863-1500	φ1500×4595	~52	2.98	9.30
PD863-1600	φ1600×4595	~60	3.10	11.32
PD863-1800	φ1800×4655	~76	3.80	13.79
PD863-2000	φ2000×4655	~90	4.80	15.86
PD863-2200	φ2200×4655	~113	5.60	18.20
PD863-2400	φ2400×4655	~130	6.50	23.68
PD863-2500	φ2500×4751	~147	7.91	28.80
PD863-2600	φ2600×4850	~160	8.64	31.57
PD863-2800	φ2800×4950	~180	9.32	35.56
PD863-3000	φ3000×5110	~210	10.49	40.73
PD863-3200	φ3200×5110	~241	12.54	47.78
PD863-3600	φ3600×5750	~305	15.54	55.99

  Carbon steel pressure filter Installation     Explanation of Model   Carbon steel pressure filter Manufacturing Process   Certificates   Customers   FAQ   Do you have certificates?
Yes , we have ISO / CE certificate and certificate of patent

Do you have design team?
We have a professional design team provide drawings, we wait for your confirmation and production

Can you guarantee delivery time ?
Timely transport, ensure the delivery time

Are you maufacturer ?
Yes, we are the professional water treatment equipment manufacturer in china