1 / 5
Model No. : | ASTM A333 |
---|---|
Brand Name : | SunnySteel |
Product description
ASTM A333 / A333M - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
Product particular communication:
1) Size: 6.35 - 114.3 mm (OD) x 0.89 - 12.7mm (WT) ;
2) Tight tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium) ;
3) Heat treatment: BK, BKS, GBK, NBK,Stress Relief, Normalizing, Spheroidize Anneal, Annealing, Bright Annealing, Normalized, Quenched and Tempered, Solution Annealing, etc ;
4) Continuous stenciling as required ;
5) Rust prevention treatment, such as: immersion oil, lacquer, passivation, phosphating,etc;
6) Plastic plugs or caps on both ends as required ;
7) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc.
8) Relevant Test: Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc),
Exterior Size Inspection, Nondestructive Test,Hydrostatic Test;
9) Main Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Boiler and Heat Exchanger, Hydraulic and Petrochemical Purpose, etc.
Commercial Information:
1) Delivery : Within 40 days ;
2) Min Order : 5 Tons; However, ERW and DOM Tube need 100 T Per Item ;
3) Packing way : As per our export standard for shipment ;
4) Term of payment : 30 T/T within 3 days after signing the contract, balance 70 before shipment. Or 30 T/T +70 irrepealable L/C ;
5) Delivery Port : Shanghai Port ;
6) Offer Validity : 5-7 Days ;
7) Container : 20\' or 40\', etc ;
8) Manufacture methods : Cold Finished Method.
Composition, %
Grade 6 A
Carbon, max 0.30
Manganese 0.29–1.06
Phosphorus, max 0.025
Sulfur, max 0.025
A For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.
TENSILE REQUIREMENTS
Grade 6
Tensile strength, min, psi (MPa) 60 000 (415)
Yield strength, min, psi (MPa) 35 000 (240)
IMPACT TEMPERATURE
Minimum Impact Test Temperature -45 C(-50 F)
Tag:
ASTM A333 Seamless pipe
ASTM A333 GR.B alloy pipe
Seamless pipe ASTM A333
ASTM A333
ASTM A333M
Seamless ASTM a333 pipe
Seamless ASTM A333m pipe
Send your inquiry to this supplier