1 / 4
Model No. : | Coiled Tubing 9.53X0.89 mm |
---|---|
Brand Name : | CNMAX |
Type : | Stainless Steel Pipes |
Wenzhou, Zhejiang, China
Product description
ASTM A269 TP304 9.53X0.89 mm Coiled Tubing
Stainless steel tubing in coils and on spools used for control lines, chemical injection lines, umbilicals as well as hydraulic and instrumentation systems.
Used for a variety of circulation systems for different gases and fluids, coil tubes provide the ability for long length tube installations
without the need for joining fittings. CNMAX produce seamless coil tubes and can provide them in long mill lengths
or cut-to-length in sections as short as fifty feet. These products have industry applicability for petrochemical, oil production heat tracing,
geothermal and flow measurement applications.
CNMAX offers stainless steel coiled tubing in sizes from 1/4 to 1/2 in. and wall thickness from 0.035 to 0.049 in.
CNMAX stainless steel coiled tubing is available in lengths up to 2300 feet, which is up to 30% long than traditional offerings.
In addition, CNMAX offers less than reel quantities of coiled tubing. Stainless steel tube straighteners make coiled tubing installation faster and easier
Select stainless steel coiled tubing for your applications.
Manufacturing Range
Coiled tubing is available in a range of different product forms depending on the customer requirements. We manufacture seam welded and redrawn, seam welded and floating plug redrawn and seamless tube products.
The standard grades are 316L, alloy 825 and alloy 625. Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request. Tubing can be supplied in the annealed or cold worked condition.
• Diameter from 3mm (0.118``) to 25.4mm (1.00``) OD.
• Wall thickness from 0.5mm (0.020``) to 3mm (0.118``).
• Typical sizes: 1/4`` x 0.035``, 1/4`` x 0.049``, 1/4`` x 0.065``, 3/8`` x 0.035``, 3/8`` x 0.049``, 3/8`` x 0.065``.
• OD tolerance +/- 0.005`` (0.13mm) and +/- 10% wall thickness. Other tolerances are available on request.
• Coil lengths up to 13,500m (45,000ft) without orbital joints depending on product dimensions.
• Encapsulated, PVC coated or bare line tubing.
• Available on wooden or steel spools.
Applications
CNMAX offers coiled control line in stainless steel and nickel alloys.
Our products are used in the following applications:
• Downhole hydraulic control lines.
• Downhole chemical control lines.
• Subsea control lines for hydraulic power and chemical injection.
• Smoothbore control lines used in fibre optic applications.
Quality assurance
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
• Non-destructive tests
• Hydrostatic tests
• Surface finish controls
• Dimensional accuracy measurements
• Flare and coning tests
• Mechanical and chemical property testing
Wenzhou, Zhejiang, China
Send your inquiry to this supplier