assembly-free formwork/high ribbed formwork

Specifications Rib Lath/High Ribbed Formwork

Material:hot-dipped galvanzied

Thickness:0.25mm 0.3mm 0.4mm 0.5mm

Rib height:13mm or 20m

Rib Lath is Expanded Metal lath stiffened by longitudinal steel ribs, formed in the same sheet of metal.  The mesh areas of the lath are expanded by cutting and stretching in the sheet of metal, the ribs being simultaneously roll-formed.  The furring design of the mesh provides an execellent background plaster for construction of partitions, suspended ceilings and refurbishment works.  The advantages of rib lath over metal lath is that the support centres can be increased or widened.   rib lath / High Ribbed Formwork    Shortening the Time (of construction)   Easy to handle due to the light-weighted subsidiary materials (i.e. 1/10 weight of plywood) Improve the work efficiency Easy to dismantle Quick refilling-up       Cost Efficiency   No skillful hand needed Cost savings of handling the form dismantling, disused materials and storage management Easy to work with Easy to bend into round form or right-angled side Curved surface       Minimizing the Space to install   1/20 of plywood in size Minimizing the storage space of material at the site Minimizing the cost of material handling       Excellence of Finished-work (plastering and tiling)   Strengthening the level of adhesion through wire-net of skeleton surface Preventing the crack of plastering surface No prime plastering required       Quality Improvement of Concrete   Easy to inspect the layout of reinforcing steel and easy to clean Ensuring homogeneous concrete strength(upper and lower parts) Restraining the surface crack Easy to strengthen the connection parts Improved earthquake-proof performance       Reduction of Wasted materials   Nearly none of wastes after construction Easy clear and clean the site       Compatible with existing forms   Plywood cast Euro-Form       Prevention of unreliable work   Visibility of installation Preventing the quality deterioration by eliminating the surplus water       Improving the site safety   Easy of handling with safety through the light-weight Excellent work results on the limited work space       Rib Lath Product parameters  

1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance  M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
4.5×15	0.3	4	75	1.26	610/750×2440
4.5×15	0.35	4	75	1.47	610/750×2440
4.5×15	0.4	4	75	1.68	610/750×2440
4.5×15	0.45	4	75	1.89	610/750×2440
4.5×15	0.5	4	75	2.10	610/750×2440

 

 

2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
4.5×15	0.3	8	150	1.25	610×2440
4.5×15	0.35	8	150	1.46	610×2440
4.5×15	0.4	8	150	1.67	610×2440
4.5×15	0.45	8	150	1.88	610×2440
4.5×15	0.5	8	150	2.09	610×2440

 

 

3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
10×17	0.3	8	75	1.06	610×2440
10×17	0.35	8	75	1.23	610×2440
10×17	0.4	8	75	1.41	610×2440
10×17	0.45	8	75	1.59	610×2440
10×17	0.5	8	75	1.76	610×2440

 

 

4. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
10×18	0.2	8	150	0.45	610×2440
10×18	0.25	8	150	0.56	610×2440
10×18	0.3	8	150	0.68	610×2440
10×18	0.35	8	150	0.79	610×2440
10×18	0.4	8	150	0.90	610×2440
10×18	0.45	8	150	1.01	610×2440
10×18	0.5	8	150	1.13	610×2440
10×18	0.6	8	150	1.35	610×2440

 

 

5. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight 3/8 Rib Lath(Hi Rib )
Finish	Wt.per Sq.Yd.	Sheet Size	Pes.Bdl	Yds/Bdl	Yds/Pallet
Galv.	3.4lbs	27”×96”	10	20	1000