1 / 5
Model No. : | ZT-002 |
---|---|
Brand Name : | Zhongtuo |
Main Power : | 3kw |
Cangzhou, Hebei, China
Product description
There are some profiles of L angle steel.
All those drawing profiles could be made by one machine. And if you need more within some range, all could be done by one angle steel making device, just you need to adjust the input coil width.
There are some pictures of angle iron making machine for your reference.
For the wall angle steel making device, here are some parameters for your reference:
Note: from drawing profile 11 to 12, we will use one
type of roller which is something like spacer but much bigger than spacer, to
adjust the sizes.
For the drawing profile 13 to 14, you do not need to
adjust anything, just put the coil at the center of the input coil leveling beach
that is enough.So all above drawing profiles could be made by one
machine.
Main elements of the angle iron making machine
Decoiler
Usage: It is
used to support the steel coil and uncoil it in a turntable way. Passive
uncoil pulled by roll forming system
Inner diameter:
450-550mm
Feeding and leveling
This part will
level coil to make sure it is neat clean and straight. Meanwhile the roller
will punch dots at both side of the C channel.
Main Machine
Size: 4300х800х1400Weight
t: 2.8 tons
Voltage:380V/50HZ3Phase(as
customer`s request)
Roller fixer :
Guide columnFrame : middle plate welded
Memorial arch
frame typeFrame thickness:25mm
Drive mode:
gearMaterial of rollers: GCr12MoV
Material of
shafts: 45# steel with tempering
Diameter of
shafts: φ50mm Number of rollers :9 rollers
Main power: 5.5kw Cycloidal planetary gear
speed reducer
Punching hole and punching logo
This part will
help you press your company logo on the finished products.
Power: hydraulic
Shearing machine
Material of
blades: Gcr12 quenched
Power supply :
hydraulic power
Frame : Pillar
style with rack & pinion system
Stroke switch
: non-contact photoelectric switch
We will give 9
pieces of cutting balde for you to change to fix those different drawing
profiles.
Hydraulic
Station
Hydraulic motor
Power: 4kw
Hydraulic oil:
46#
Components: The
system includes a set of hydraulic tank, a set of hydraulic oil pump, and two
hydraulic pipes. And three sets: one is for punching hole; one is for
printing words and one for cutting. Sets of electromagnetism valves.
Electric
Control System
Feature:
1. Adopted PLC,
transducer, touch panel from Delta Taiwan to ensure high speed with
stability, precision and lifetime.
2.Other electric
element are Delta
3. Equipped with
movable switch, air break, radiator, transformer & electric leakage protector
for operation convenience and safety.
Runout table
It adopts welded
steel and supported roller to transmit the products.
Loading capacity: 1.5TUncoiling width: 300mm
For the L angle steel, if you want to make with punching holes, you just need to add one more punching machine and one more servo coil feeder. The following are some pictures for your reference.
Cangzhou, Hebei, China
Send your inquiry to this supplier