1 / 1
Brand Name : | Kexinda |
---|
Product description
No | Item | Parameter | Note | |
1 | Suitable
Material | Type | Steel sheet |
|
Roller Shutter | Thickness: 0.7-1.0 mm |
| ||
2 | Product Specifications | Detail as the attached drawing | ||
3 | Power Requirement | Type | 380V/3PH/50HZ |
|
Main motor power(KW) | 3 |
| ||
Cutting power(KW) | 2.2 |
| ||
4 | Forming Speed(m/min) | 15-18 |
| |
6 | Forming Stand | 12 | Depend on actual design | |
7 | Forming Shaft Diameter(mm) | 65 | Depend on actual design | |
8 | Type of Cutting | Roll-formed and length-set cutting |
| |
9 | Control System | Mitsubishi PLC and inverter |
| |
10 | Run Out Table | 2mX3 |
| |
11 | Installation Dimension(m) | 8X1.5 | Without the panel length | |
12 | Total Weight(T) | 8 | Depend on actual design |
No | name | qty |
1 | decoiler | 1 |
2 | Automatic control system | 1 |
3 | Hydraulic system | 1 |
4 | Automatic cutting | 1 |
5 | Products receiving tables | 1 |
| Description | Specification |
1 | Main moter power | 3 kw |
2 | Hydaulic sation power | 4 kw |
3 | Hydraulic station pressure | 10-12 MPa |
4 | Control system | PLC |
5 | thickness | 0.25-0.6mm |
6 | Forming speed | 12m/min |
7 | Effective width | 840mm |
8 | Hydraulic oil pump | CBN-E310 |
9 | Diameter of principal axis | 85mm |
10 | Frame thickness | 20mm |
11 | sprocket | P-25.4 |
12 | Material of roller | 45#steel hard chrome palting |
13 | Extemal dimension | 6200mm*1350mm*1300mm |
14 | Total weight | 2.2 T |
15 | Equipment parts:includes:roll forming system,hydraulic system,PLC frequency conversion control system,counter,cutting system,product supporter. |
Send your inquiry to this supplier