1 / 5
Model No. : | HZ |
---|---|
The Work Environment : | -20℃~+120℃ |
Product description
Chain conveyor
Chain material: carbon steel, stainless
steel, thermoplastic chain, according to the needs of your product to different
width, different shapes of chain plate to complete the plane transport, plane,
ascending, decline, etc.
Chain plate specification: the width of
the straight chain plate is 63.5, 82.5, 101.6, 114.3, 152.4, 190.5, 254,304.8.
The width of the turning chain is 82.5, 114.3, 152.4, 190.5, 304.8.
1. The conveyor surface of the chain conveyor is smooth and smooth, the friction is small, and the material is excessive and stable between the conveyor line
2. The chain has stainless steel and
engineering plastic materials, which can be selected according to the conveying
materials and process requirements, which can meet different needs of different
industries.
3. Large conveying capacity can carry a
large load
4. The conveying speed is accurate and
stable, ensuring accurate synchronous delivery
Screen conveyor
The spiral conveyor is divided into two
kinds: axial screw conveyor and non-axial screw conveyor, which are divided into
u-type screw conveyor and tube type screw conveyor. The axial screw conveyor is
suitable for non-stick dry powder materials; And no axial screw conveyor
suitable for sticky and easy winding materials.
When the screw axis rotation, due to the gravity of the material and the tank
wall solutions generated by friction, make the material only under the push of
blade groove bottom along the conveyor moving forward, the situation can't seem
to rotate the nut along the rotation of the screw for translational motion. The
movement of the material in the middle bearing is the thrust of the material
that is moving forward. Therefore, the transport of materials in the conveyor is
completely a sliding motion. In order to keep the spiral shaft in a favorable
tensile condition, the driving device and unloading port are generally placed on
the same end of the conveyor, while the feeding mouth is placed near the rear
end of the other end. The rotating spiral blade is transported by the material,
so that the force of the material not rotating with the blade of the spiral
conveyor is the friction resistance of the material's weight and the screw
conveyor casing to the material. The face type of the blade has the type of
solid surface, belt type, blade face type according to the different conveying
materials. The spiral shaft of the screw conveyor has a thrust bearing at the
end of the material movement direction to the axial force of the screw with the
material. When the captain is longer, he should hang the bearing in the middle
Belt conveyor, bue to [1] has advantages
of simple structure, easy maintenance, standardization of parts, are widely used
in mining, metallurgy, coal and other industries, used to transport loose
materials or items, according to the conveying process requirement, can be a
single transmission, also can be more than one component or with other conveying
equipment to form horizontal or inclined conveyor system, in order to meet the
different types of homework line need to, is suitable for conveying bulk density
is less than 1.67 ton/cubic meters, easy to take out the powder, granular, small
block of low grinding cut materials, or packaged materials, such as coal,
gravel, sand, cement, chemical fertilizer, food, etc. Sent material temperature
is less than 60 ℃. The pilot-in-command and assembly form can be determined
according to the user's requirements, the transmission can be used as a drum,
and also the drive device with the drive frame.
The belt conveyor structure forms a
variety of forms, such as trough belt machine, flat belt machine, slope belt
machine, side tilting belt machine, turning belt machine, etc.
Send your inquiry to this supplier