Product Description Specification: Cpacity: 2000L/h
Power:5.5kw
character:with self-desluge device and self-cleaning
material:higher strenth stainless steel The milk & diary disc separator series are mainly applied in milk industry. Description: The milk & diary disc separator series are the most important equipment in dairy industry. Mainly used in the skim milk, butter, casein, cheese production, anhydrous butter production process, such as centrifuge concentrate, and removal of foreign impurities in the milk. Similar materials can also be used for clarification and purification. The purifying capacity is from 2 to 45 t/h, the deffating capacity is from 1 to 35 t/h. milk cream separator absorbs the advantage of the same kind foreign .Product in Germany and Russia. All the parts that may contact the feedstock are made of stainless steel. Availably reduce the chemical effect of the feedstock and the machine spare parts. Power drive adopts the triction clutch, Transfer power by the fluid, start reliably, prevent overland. The bearings used the machineare SKF grade in Sweden., guarantee working precision of the machine. Features: The milk cream separator machine adopts the PLC automatic control system, can carry out automatic de-slugging, ability of fitness is stronger, automatic degree is high. Easy to adjust, worker labor strength is opposite to ease, the solids content ratio in the mixture fluid is widely When working,the sealing water 7 is bumped into the sealing room 6,rising the sliding piston, and sediment ejection hole 3 is shutted down. then, Milk to be processed are fed to the bowl from feeding pipe1, Under the effects of centrifugal force, the solids which has heavier density is collectedon the bowl wall, After a while, the opening water 7 is bumped into the opening room 5, falling the sliding piston,open the sediment ejection hole 3, impurities are desluged from the bowl. The lighter liquid (fat) flow along the inner side of the discs into the passage in the upper distributor,the lighter product(fat) is discharged from the machine by the lower centripetal pump8.The heavier liquid(skim milk) flow along another passage, discharged from the machine by the upper centripetal pump2.Thus the milk is separated well. The separator adopts self de-slugging and centripetal pump. Thus the machine can work continuously for a long time, attain good separation effects in long run. Application: Milk creamseparator machine is mainly used skim milk, whey protein isolate, butter, wheat shock shower, casein, cheese production, anhydrous butter centrifuge enrichment and other production processes for medium to large dairy industry enterprises. Equipment uses a closed structure, with milk contact parts made of stainless steel, in line with national food hygiene standards. Device according to user requirements, can also be used in the milk, milk residue, after condensation casein, the protein and whey protein isolate, and whey clarification and purification.
Mainly technology data:
Bowl inner | mm | 350 | Bowl speed | r/min | 7320 |
product | L/h | 2000 | power | kw | 5.5 |
fat output | centripetal pump | Skim milk output | centripetal pump |
Sludging-mode | PLC | Output pressure | MPa | 0.3 |
temperature | °C | 35~55 | Fat in skim milk | 0.015~0.04% |
height | kg | 450 | Dimension( L*W*H) | mm | 1250*1100*1500 |
| | | | | |
Product Effects
Assembly Parts:
Our customer working site:
Assembly parts: Disc
Bowl
1.Milk cream separator machine starts the friction to strat off ,about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate. 2.The bearings use imported FAG, transducer using Japan brand “ Fuji”, the main strengthen parts of Roller body and Roller cover use 2Cr13,and the other parts of contacted materials such as Disc all use 304L.
3.The Stainless steel cover use SUS304.
The standards of design, manufacture, test:
National mechanical profession main standard
JB/T8103-1999(disc type separator technical specifications)
(The main components of Equipment and the composition of materials)
1.Access device 2Rotor drum 3paring disc device4drive system 6Stainless steel cover 6engine base 7Motor.
Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise and vibration, the installation path is very easy to operate.
The bearings use imported FAG, transducer using Japan brand “ Fuji”, the main strengthen parts of Roller body and Roller cover use 2Cr13,and the other parts of contacted materials such as Disc all use 316L.
The Stainless steel cover use SUS304.
The base use casting steel, coating does the same way as ship bottom. Packaging & Shipping
Adopt wooden box for packing.
Special tools spare parts are in the wooden box
The Separator is produced according to the ISO9001-2000 quality management system Our Services Company Service for milk Separator We, Liaoyang Hongji Machinery CO.,LTD, We will provide the most environment-friendly and
safe products with high-quality at most favorable price for the customer, together with perfect
after service.
Packing :
1.Machines are wrapped in plastic bags first before being convolved with straw rope.
2..Then the machine is putted in strong iron sheet case/wooden case, lined with metal wire if
necessary.
Payment Term
T/T, Western Union, L/C, or can be negotiated.
Delivery Time We will send you the machine within 3-10 working days after
receive your down payment.
Malfunctions which are caused by machine-self and quality will be responsible
for our manufacturer. We can provide you the spare parts with production cost
all the year round. Contact Details for Coconut Oil Separator If you are
interested in our coconut oil separator, please kindly send me email or call me
directly, I will reply you asap. Thanks!