Alarming and Charging Phone Security Device (FC160H)

Production description

1. Model Name: FC160H
2. A disconnect alarm function: Contacts separated alarm, disconnect alarm, USB jack unplug alarm
3. It is convenient to keep your mobile phone/tablet PC/camera safe apply in supermarket &store
4. With alarm and charging, charging and anti-theft alarm can share one line at the same time
5. High quality with lower price

Package Included

Series (Host)
Universal USB Adaptor 5Vdc / 500mA
Infrared Remote Control( five host with one remote control)

Function

1. A disconnect alarm function: Contacts separated alarm, disconnect alarm, USB jack unplug alarm
2. Fortification solution and defense: Auto fortification; Solution of anti-manually or remote control anti-solution
3. Remote control: Infrared remote control ON (Active) / OFF

Features

1. Quick Reaction speed, pull or cut the USB cable, the Alarm warning
2. Remote control function: Once the alarm has been triggered, restitution cannot disarm, the alarm must be reset by remote control "OFF" key to disarm (press remote control "OFF" key to relief). With high safety factor, it can protect customer's property
3. Built-in alarm horn, high-volume alarm on the bottom, can avoid destruction of the thief.
4. With Remote Control function, easy to use
5. LED light display current status
6. Wide range Application: Retail chain store or exhibition center for Tablet PC, Camera, Smart Phone, GPS and other exhibits anti-theft and reusable

Operating Step

1. Power ON/OFF Slide Switch: Please turn power ON before setting (on the bottom).
2. Tear off 3M stickers on the bottom, and stick metal bottom on display desk.
3. Tear off 3M sticker (on Magnetic sensor) and stick on rear side Smart Phone.
4. Tear off 3M sticker on the Demo-Alert (small detecting sensor), and stick on Smart Phone (front or rear side surface).
5. Set up Demo-Alert in Active position: Press ON button on Remote Control; You'll hear a beep sound and Red LED blinking (one time), in Active position.
6. Demo-Alert Sensor: 3 detecting sensors and phone jack connector are detect point, either one of detecting sensor Slip or phone jack disconnecting (active position), Alarm warning immediately and Blue LED blinking until alarm relief.
7. Relief alarm: Press Remote Control OFF button to relief alarm warning and hear horn alarm.
8. Active Display Charge: Provide charge function, when Smart Phone battery low, you can plug charge cable between Smart Phone (Micro USB port) and Magnetic connector (a black hole at left side Magnetic connector), or direct charge from Adaptor to Smart Phone.
9. Low Power Indicator: When green LED light blinking, please plug USB port into to AC adaptor, mini USB plug into left side Demo-Alert metal base, then AC adaptor plug into Outlet (please avoid battery dried-up).
10. Working Period (in Active): 2 weeks (full charge).
11. Charge Time: 5 hours.
12. Low Power: Green LED blinking until power dried-up or charge.
13. Charging: Red LED turns ON.
14. Full Charge: Green LED turn ON.
15. Alarm: Red LED Blinking.
16. In Active (when you set up Alarm): Blue LED Blinking.
17. Remote Control: 5 units with one remote control.

The Device will alarm as follows

1. Any place that stick with the stand has a sensor. If any sensor is away for the cell phone or the camera, it will alarm
2. Charge port alarm. If the stand is away from the display table, it will alarm work
3. Separately, not need to work with other device. Work Separately, do not need to work with other device for alarm
4. Cut the spring wire
5. Put out the connector
6. Put out power connector- alarm