Specifications sand mold casting:
1. According to standard ASTM, EN, DIN, JIS, or sample, or drawings.
2. Popular in Europe, America
sand mold casting is a steel cast mould which is used for solidification of molten steel in order to form a special ingot. Ingot mould is an essential and turnover bulk producing equipment. It impacts both the outsurface and inner quality of the ingots. 1. Material: cast steels AISI 8630 2. Mechancial properties:
Tensile strength | min. 730MPA |
Yield strength | min.590MPA |
Elongation | Min.17 |
Reduction of area | Min.35 |
3.Delivery condition: normalized 4.Quality assurance The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.
The standard documentation ensures the full traceability of every process step:
Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,
Mechanical properties and non-destructive examination;
Dimensional check supported with a “as-built“ sketch;
Record of the quality heat treatment